photo toplogo1_zps46807118.jpg

 photo americlps_zpsavfgvdau.jpg

Dag Evert's "American Classic"

As mentioned on the forum, heres a picture I took some time back, with natural winter daylight.
A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play,
contact surfaces stoned, and trigger springs somewhat reduced within safe limits.
The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)
-- Dag Evert

 Return to Index  

22xx valve extension bushing available

May 12 2012 at 2:53 PM
zach allen  (Login sonargodz)
Crosman Forum Member
from IP address 66.87.71.170

I will be offering this soon depending on the response. Made of silicon bronze and lengthens stock valve by 1 5/8ths, the difference in length between a 2240 and 2250 tube. 2250 tube would be optimal setup, using a 2240 endcap. The spring and co2 piercing (if you choose to use a 12 gram) are up to you. I know that there are endcaps out there that pierce the cartridge. This valve extension could definitely be used for bulk fill applications. Also let me know if you are interested in longer extensions. I can make them for you. Call me at 3609293589 or email me at sonargodz @ hotmail.com. Take the spaces out of the address.


    
This message has been edited by sonargodz from IP address 66.87.71.170 on May 12, 2012 3:01 PM


 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member