2260 with short crosman receiver atop a mini riser made from aluminum tube. Barrel is a 2200 soda straw
tensioned inside a titanium golf club shaft. Three screw mod to the trigger, bulk co2, SSP 250 rear cocking
striker assembly. Factory stock, reshaped, bedliner finish and stick on cheek piece. The idea was a weather
resistant light hunter for rainy days.
I've got a Cothran stainless receiver and gas tube waiting for me to get back to this one.
I've heard it described that the sweep of a gauge can help indicate its accuracy. Something about a 0-5,000 psi gauge will give different readings than a 0-2,500 psi gauge when reading the same actual pressure. What I read was that the accuracy of the gauges has a sweet spot of sorts that it's calibrated to where at a particular pressure it's dead on. Other places along its sweep of pressures will be less perfectly accurate and this varies per gauge and per their maximum pressure variation. The widest sweep or range of gauge will give the least accurate pressures, at least in the inexpensive gauges. A narrower range of pressures may be more accurate, depending on quality. So quality, how they're calibrated and maximum pressure reading sweep play a part.
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member