The (new) Crosman Forum, your first and last stop for all things Crosman

CG01.jpg CG01.jpg

Carl Quick's LiteWieght 2240

So for about the last 24 months, I've had her on a serious diet. Now I am happy to report that she lost nearly 13 ounces and is feeling so much better. And let me say one thing, when I pick her up with one hand now she is light as a feather. Well, almost a feather.

Things I have done so far:

OEM main tube was lightened by me.
Barrel is OEM and trimmed down by me.
Main tube plug is made of Delrin by me.
Gas cap is aluminum, comes from HPA and bored out by me.
Hammer is made from Delrin by me with a modified 1701P striker.
Valve is an aluminum Disco rear end with a brass Pro-Top by Anthony.
Trigger grip frame is aluminum by Bluefork Design and then hogged out by Gregg.
Front barrel band is aluminum, made by Anthony, drilled by Rich and milled by me.


 Return to Index  

I have searched awhile this am and could not find the answer,

July 31 2012 at 10:33 AM
VAF  (Login VAFarmer)
Crosman Forum Member
from IP address

but it seems like the info should be here.

Any body have the following O-ring sizes from your notes?

2400KT-.22 caliber bolt O-ring
2400KT-Valve outer o-ring
2400KT-valve inner 0-ring


Benjamin HB .22 caliber bolt O-ring
Benjamin HB Valve inner o-ring
Benjamin HB Valve outer o-ring


2400 KT Valve retaining screw, the goes inside the trigger--want to upgrade in shear strength, maybe to a grade 8 or so.

Thanks and God bless,


 Respond to this message   

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member