logo by smgunner

Dean's HiPac 2240

Tactical Trijicon ACOG TA01 Style 4x32 Cross Sight Rifle Scope + Kill Flash
TROBB Solid Aluminium Dovetail Power Block with Gmac hollow probe and G-mac Bolt
Gmac Brass Power Adjuster Spring And Guide/Drilled Out Standard Valve For more air space
Hammer Mods//Gmac 30% Lighter valve Spring/Gmac Brass Safety Catch//Transfer port drilled out
Full Gmac Trigger kit/Gmac barrel cut to 9inch/Weihrauch Silencer/Custom Home Made Grips/
New TRACER LEDRAY GL2 LAMP 90m Range Beam//HI-Pac

 Return to Index  

Crosman Mk1, later style piercing cap question

August 6 2012 at 7:54 PM
  (Login BEnoch)
Crosman Forum Member
from IP address 99.30.73.241

Hello,

I just picked up a Mk1 later style pistol. It needs new seals. The piercing cap fell apart when I took it out of the gun. The star washer, and then a thicker steel washer with a slot on one side like a screwdriver slot. I don't know if it goes up or down. It is part number 10-082 in this schematic. for the Mk1 (MkII) Service Manual II
http://www.network54.com/Forum/275684/message/1140982541/Crosman+Mark+1+%28Mark+II%29+Manuals+-+Owners+%26amp%3B+Service

I'm sure I need to put new seals through out this gun. I guess I will be ordering several kits from Tim at Mac1. The other question is how does that above part, the thicker steel washer with a slot in one side, go in? Does it go with the slot facing down towards bottom of cap or up, as in facing the Co2 canister and facing up as in towards top of gun?

Thank You,

Bryan Enoch

Shoot Safe,

Bryan


    
This message has been edited by BEnoch from IP address 99.30.73.241 on Aug 7, 2012 6:37 PM


 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486