The (new) Crosman Forum, your first and last stop for all things Crosman

CG01.jpg CG01.jpg

Carl Quick's LiteWieght 2240

So for about the last 24 months, I've had her on a serious diet. Now I am happy to report that she lost nearly 13 ounces and is feeling so much better. And let me say one thing, when I pick her up with one hand now she is light as a feather. Well, almost a feather.

Things I have done so far:

OEM main tube was lightened by me.
Barrel is OEM and trimmed down by me.
Main tube plug is made of Delrin by me.
Gas cap is aluminum, comes from HPA and bored out by me.
Hammer is made from Delrin by me with a modified 1701P striker.
Valve is an aluminum Disco rear end with a brass Pro-Top by Anthony.
Trigger grip frame is aluminum by Bluefork Design and then hogged out by Gregg.
Front barrel band is aluminum, made by Anthony, drilled by Rich and milled by me.

Quickster47



 Return to Index  

1968 Crosman PowerMaster 760 Manual

June 6 2013 at 10:14 PM

Mickey Edwards  (Login WildmanMick)
Crosman Forum Member
from IP address 174.106.150.107

I received a copy of this manual from Drew Fritts...

Page 3:

The Powermaster 760 is a BB Repeater, Self-cocking, Pneu-
matic pump action Rifle with a BB reservoir capacity of over
180 BBs plus an integral magazine with 18 BB capacity. It is
also designed for shooting caliber .177 Crosman Super Pells
as a single shot rifle. Low Power and High Power shooting is
attainable with a unique, easy, fast short stroke, high com-
pression pump system. Two to three pumps is all that is
necessary for accurate shooting at velocities of standard BB
Rifles. NOTE: For target shooting, 3 pumps are recom-
mended. Do not attempt to shoot with less than 2 pumps.
When longer distance and greater power are necessary for
field shooting, the gun may be pumped up to 25 times.

NUMBER OF PUMPS 2 3 4 5 6 10 15 20 25
Velocity (FPS)* 300 385 415 460 500 560 600 640 660
*Feet per second
'Approximate average velocity

I have a copy of this manual in pdf and will send as an email attachment upon request.

 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member