The (new) Crosman Forum, your first and last stop for all things Crosman


Jim Gillilan's Custom 1322 Carbine

Jim Gillilan's Custom 1322 Carbine w/Custom Stock

Here's one I'm especially proud of and is modded all over, doing 12fpe at 15 pumps.
Stock is Teak from Thailand and super light weight 1322 Carbine!

 Return to Index  

Yes, that is what I was refering to as a muzzle weight and

April 22 2017 at 10:31 PM
John Thomas in Spokane  (Login jcl08)
Crosman Forum Member
from IP address 97.115.163.134


Response to What I Need is Some Knowledgeable Advice on What Will Work

is what I used. The pin post unscrews and can be replaced with a taller or shorter pin (usually available on ebay also, as is a blade type made to replace the pin) as needed to work with the Williams WGRS-54 or either of the two Williams sights I mentioned earlier.

http://www.pyramydair.com/a/Accessories/Open_target_sights/69

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.Xcrosman+sight+pin.TRS0&_nkw=crosman+sight+pin&_sacat=0

 
 Respond to this message   
Responses

  • Williams WGRS-54 ... Eliminated From Consideration - No Airgun` Retailer Lists the Sight - Alejandro O. Martinez on Apr 22, 2017, 11:54 PM
  •  
  • Photo of 760 with Williams WGRS-54 and Higher Front Sight - A.O. Martinez on Apr 23, 2017, 6:48 PM
  •  

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member