The (new) Crosman Forum, your first and last stop for all things Crosman


Jim Gillilan's Custom 1322 Carbine

Jim Gillilan's Custom 1322 Carbine w/Custom Stock

Here's one I'm especially proud of and is modded all over, doing 12fpe at 15 pumps.
Stock is Teak from Thailand and super light weight 1322 Carbine!

 Return to Index  

Quick comment...

April 28 2017 at 12:45 PM

Mike T.  (Login TKO22)
Crosman Forum Member
from IP address 68.15.228.128


Response to PS: Rich, by any chance are you left-handed?

The fan angle (|/\| -- the term we use in the shop) is controllable through a swiveling nozzle. We can program the nozzle to account for the angle to increase the fan angle on the waste material and be square to the part. But... that slows the process down considerably and our machine (OMAX) can only perform it through a slightly wider radius than the finger pad radius.

Funny .. I did consider which side of the raw plate to cut, and picked the 90% side!

 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member