The (new) Crosman Forum, your first and last stop for all things Crosman


Jim Gillilan's Custom 1322 Carbine

Jim Gillilan's Custom 1322 Carbine w/Custom Stock

Here's one I'm especially proud of and is modded all over, doing 12fpe at 15 pumps.
Stock is Teak from Thailand and super light weight 1322 Carbine!

 Return to Index  

You're right about that darned safety ball, but wrong about grinding the bottom...

April 29 2017 at 7:58 PM

Steve in NC  (Login pneuguy)
Crosman Forum Member
from IP address 162.198.201.47


Response to Looks like you lost your safety ball with all that trigger work

...of the blade being an option (I think), because when the sear is cocked, the lobe of the blade that contacts the sear is bottomed out against the opposing side cover screw boss.

So either the lobe or the sear have to lose material -- at least that was my take -- unless of course you wanted to grind both bottom of lobe and blade.


    
This message has been edited by pneuguy from IP address 162.198.201.47 on Apr 29, 2017 8:04 PM


 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member