The (new) Crosman Forum, your first and last stop for all things Crosman


Jim Gillilan's Custom 1322 Carbine

Jim Gillilan's Custom 1322 Carbine w/Custom Stock

Here's one I'm especially proud of and is modded all over, doing 12fpe at 15 pumps.
Stock is Teak from Thailand and super light weight 1322 Carbine!

 Return to Index  

Just to show...

May 1 2017 at 6:25 PM
gubb33ps  (Login gubb33ps)
Crosman Forum Member
from IP address 162.192.93.122


Response to Ain't too keen on

...not a Crosman in this case, a BAM 51, but it pretty well localized the leak. (yep...dowdy seals can go bad).

Under 2.5" of hot water.

photo 473d4248-639a-497f-80d1-c1ccb50399b7.jpg


HOT WATER is the key here (no little ones here, so the hot water is hot...like 180-185F)...dry it with a towel, "fling-n-sling" the tube, (if you have compressed air to blow out the little creases, all the better) and it's dry in about 2 minutes.


    
This message has been edited by gubb33ps from IP address 162.192.93.122 on May 1, 2017 6:27 PM


 
 Respond to this message   

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member