The (new) Crosman Forum, your first and last stop for all things Crosman


Jim Gillilan's Custom 1322 Carbine

Jim Gillilan's Custom 1322 Carbine w/Custom Stock

Here's one I'm especially proud of and is modded all over, doing 12fpe at 15 pumps.
Stock is Teak from Thailand and super light weight 1322 Carbine!

 Return to Index  

Re: Feasibility of Big Bore On 2240 or 2250(2400KT) Platform

May 5 2017 at 7:18 AM

Bio  (Login Biohazardman)
Moderator
from IP address 71.236.167.69


Response to Feasibility of Big Bore On 2240 or 2250(2400KT) Platform

This is a bit dated http://www.network54.com/Forum/275684/thread/1132852914 scroll down near the bottom of the page, think I got near 30fpe on carts higher on bulk co2 then took it to 1500 psi HPA after securing the valve good but don't remember the numbers. A kick in the pants to shoot they are but spendy pellets and only a few shots per cart or fill. Loopy trajectory but good for 30-35 yards the gun was stolen by the druggies though so never really got finished.
The more recent 9mm carbine/arrowgun combo was the 70-100+ fpe gun. http://www.network54.com/Forum/275684/thread/1451974649
http://www.network54.com/Forum/275684/thread/1454474336 Really light gun with the infamous Cothran valve which is better than anything I have built thus far. Others have done the 9mm and 30 cal. as well.
I used to have a life. But now I have the forum. I am a sick man?

[linked image]


    
This message has been edited by Biohazardman from IP address 71.236.167.69 on May 5, 2017 7:29 AM


 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member