Crosman Airgun Forum

Not logged in | Login | Create Account Search    Post now! steve in nc View Thread - robny on Jul 14, 2012, 12:58 AM   Will the Titan stock work on the Nitro Venom? View Thread - LexingtonGreg on Jul 13, 2012, 4:03 PM Yes, diect swap. n/t - Dukemeister on Jul 14, 2012, 7:08 PM   Marauder Pistol Setup Spread Sheet View Thread - dan house on Jul 13, 2012, 3:16 PM Got me! I see how you are... nt - Mark G. on Jul 13, 2012, 3:53 PM Now I know why you have headaches LOL - buster on Jul 13, 2012, 4:03 PM It's all GEEK to me. n/t - Andy on Jul 13, 2012, 4:08 PM Oh dear. - dan house on Jul 13, 2012, 4:45 PM Fixed it - dan house on Jul 13, 2012, 4:58 PM Why not a full mag, ,, 8 shots - buster on Jul 13, 2012, 5:18 PM or two or three?.... - rsterne on Jul 13, 2012, 5:32 PM I think tow or three mags will be tested - dan house on Jul 16, 2012, 10:15 AM 5 shots is what the A_team tunig doc recommended - dan house on Jul 16, 2012, 10:14 AM   "gas engine intake port model" View Thread - dan house on Jul 13, 2012, 2:10 PM PORTING.... - Greg Lundy on Jul 13, 2012, 3:17 PM OK so thats 2 that disagree with the intake model - dan house on Jul 13, 2012, 3:26 PM Agreed but there are similiaritys - James S on Jul 13, 2012, 3:39 PM "minimum of turbulence" - dan house on Jul 13, 2012, 3:58 PM Actualy, turbulence , carefully controlled, is the aim of many gas engine ports - scot laughlin on Jul 14, 2012, 12:12 AM Restriction and turbulance... - Greg Lundy on Jul 13, 2012, 4:51 PM More an exhaust port model than intake port.... - rsterne on Jul 13, 2012, 3:47 PM Re: More an exhaust port model than intake port.... - Andy on Jul 13, 2012, 4:07 PM Cherry Boombs! - dan house on Jul 13, 2012, 4:59 PM I WAS ALWAYS A "THRUSH" KIND OF GUY!!!!........ - Greg Lundy on Jul 13, 2012, 5:10 PM Here you go, Dan! - Steve in NC on Jul 13, 2012, 6:04 PM STEVE, YOU ARE TOOOOO MUCH!!!!.....NT - Greg Lundy on Jul 13, 2012, 6:56 PM Seriously guys Have we exhausted this thread yet ? NT - James S on Jul 13, 2012, 7:43 PM ports - Dave on Jul 13, 2012, 8:20 PM Re: ports - Airfierce on Jul 13, 2012, 11:20 PM Very few pellets ever slow down in the barrel.... - rsterne on Jul 14, 2012, 9:41 AM The reasons I see real problems with the GEIP model are several - scot laughlin on Jul 14, 2012, 12:07 AM botm line is still the kinks NT - Dave on Jul 14, 2012, 12:27 AM Kinks is it - James S on Jul 14, 2012, 8:31 AM Re: botm line is still the kinks NT - Airfierce on Jul 14, 2012, 8:54 AM The governing physics are the same between the two models, but the flow dynamics differ - scot laughlin on Jul 14, 2012, 11:23 PM Race engine flow model - Curt on Jul 14, 2012, 5:05 PM Big difference, Piston speeds around 30 meters per second for IC - Cal on Jul 14, 2012, 6:44 PM riddle me this - Ron on Jul 15, 2012, 8:39 AM You may as well ask Shroedinger's cat.... - rsterne on Jul 15, 2012, 9:09 AM Ther is a way of knowing - Ron on Jul 15, 2012, 9:59 AM A "duty" perhaps.... - rsterne on Jul 15, 2012, 11:30 AM Ah, I made a mistake - Ron on Jul 16, 2012, 8:17 AM We're on the same page.... - rsterne on Jul 16, 2012, 11:17 AM   LEAD SLED 2003 testing , man this thing has beastly recoil now View Thread - robny on Jul 13, 2012, 12:42 PM I'd think it might slow down a little more - dan house on Jul 13, 2012, 12:48 PM yes..i just fired with the mag in, it makes a difference but not enough - robny on Jul 13, 2012, 12:52 PM man... - Trevor on Jul 13, 2012, 1:17 PM thats the goal lol - robny on Jul 13, 2012, 1:24 PM Recoil? Oh right - dan house on Jul 13, 2012, 2:15 PM yep..and sadly now that im gonna add even more its gonna feel - robyny on Jul 13, 2012, 3:06 PM couple things.... - dan house on Jul 13, 2012, 3:20 PM BRAINSTORMING!!!!..... - Greg Lundy on Jul 13, 2012, 3:36 PM mmm, yea I think your right - dan house on Jul 13, 2012, 4:01 PM eaqual and opposite reaction - robyny on Jul 13, 2012, 4:49 PM no battery - robyny on Jul 13, 2012, 4:47 PM The slide spring normally isn't compressed the 2003's cycling. - CO222 on Jul 14, 2012, 11:21 PM yea..the spring has little function even - robny on Jul 15, 2012, 9:17 AM Restricting a bleed hole would increase the shot power - CO222 on Jul 15, 2012, 11:27 PM i see..after slide is attached i will further experiment with gas proportions. - robny on Jul 16, 2012, 10:10 AM CYCLIC RATE REDUCTION..... - Greg Lundy on Jul 13, 2012, 3:28 PM i dont wanna retard the timing of the mechanism - robyny on Jul 13, 2012, 4:52 PM maybe... - Andy on Jul 13, 2012, 4:12 PM thats a possibility - robyny on Jul 13, 2012, 4:54 PM   when you want a stock done right... View Thread - justin on Jul 13, 2012, 1:50 AM duct tape - Trevor on Jul 13, 2012, 2:37 AM nice - justin on Jul 13, 2012, 3:30 AM What are you trying to do to it? n/t - Andy on Jul 13, 2012, 3:16 AM Re: What are you trying to do to it? n/t - justin on Jul 13, 2012, 3:42 AM customizing plastic stocks - Andy on Jul 13, 2012, 6:05 AM I think itll be ok - dan house on Jul 13, 2012, 11:40 AM I've used both body filler and fiberstrand (sort of bondo with fiberglass mixed in) - scot laughlin on Jul 13, 2012, 10:26 AM What everybody said - dan house on Jul 13, 2012, 11:53 AM   My 1377c project follow up View Thread - WyoMan on Jul 12, 2012, 9:01 PM yes and no - robny on Jul 12, 2012, 11:46 PM PCP is pretty popular now. - Andy on Jul 13, 2012, 3:25 AM Come on Andy a little meth never hurt anyone.. - JohnW on Jul 13, 2012, 9:17 AM Well..... - Andy on Jul 13, 2012, 10:34 AM Belwo 40? thats 6 months of the year around here - dan house on Jul 13, 2012, 11:54 AM Same here in these parts neighbor - WyoMan on Jul 13, 2012, 12:14 PM I'd say no, but...... - dan house on Jul 13, 2012, 12:26 PM Where in the great State of wwyoming are you? - dan house on Jul 13, 2012, 12:28 PM Southwest Wyoming where elevation is more than population - WyoMan on Jul 13, 2012, 12:40 PM Since you mentioned co2... - JohnW on Jul 13, 2012, 12:20 PM   AIRGUN HOBBYIST MAGAZINE..... View Thread - Greg Lundy on Jul 12, 2012, 7:37 PM   2240 to 2260 valve tube conversion View Thread - Bubba_D on Jul 12, 2012, 5:45 PM Absolute bolt on, just the 2260 tube needed.... - rsterne on Jul 12, 2012, 6:59 PM 2240/Disco tubes - Bubba_D on Jul 12, 2012, 9:46 PM   Pellets clipping my Moderator. Any solution.... View Thread - Mark on Jul 12, 2012, 4:59 PM align the moderator/LDC? - robert on Jul 12, 2012, 6:18 PM cleaning rod, .17 hmr.nt - robny on Jul 12, 2012, 11:49 PM   Maruader Pistol musings..... View Thread - dan house on Jul 12, 2012, 11:42 AM seems like shot count is down? - robny on Jul 12, 2012, 1:00 PM Cant say shot count was down - dan house on Jul 12, 2012, 1:42 PM Re: seems like shot count is down? - REARSPROCKET on Jul 12, 2012, 4:21 PM Dan you sound like me with the headaches - buster on Jul 13, 2012, 6:41 AM Headaches... a number of things - dan house on Jul 13, 2012, 1:08 PM   Barrel re-crowning does the trick! View Thread - Mark on Jul 12, 2012, 6:35 AM On the subject barrel crowning - Tom on Jul 12, 2012, 8:09 PM Few companies will give the same love, care & attention that you will! n/t - Mark on Jul 13, 2012, 12:46 AM   Anybody know where I can get a Paintball to Airsource Short adaptor? View Thread - Mark on Jul 12, 2012, 6:21 AM It's possible - ray carter on Jul 12, 2012, 7:57 AM Crosmods AS adapter - Jack Witas on Jul 12, 2012, 9:42 AM 850 adapter - Ted Stanbrough on Jul 13, 2012, 1:40 AM   Shooting a 397.. View Thread - Pete Hallock on Jul 11, 2012, 9:57 PM Re: Shooting a 397.. - Andy on Jul 12, 2012, 5:40 AM Thanks, Andy.. - Pete on Jul 12, 2012, 7:07 AM good eplxanation Andrew! - dan house on Jul 12, 2012, 10:36 AM And NEVER leave your automibile sitting on it's wheels when parked! - Cal on Jul 14, 2012, 6:51 PM   One more for medium power PCP View Thread - robert on Jul 11, 2012, 6:23 PM   Chuffed with mods made so far to son's 1077 View Thread - Mark on Jul 11, 2012, 5:25 PM Sounds good so far n/t - Andy on Jul 11, 2012, 7:40 PM SWEET! - dan house on Jul 12, 2012, 10:46 AM   Anyone know how to remove the shroud on a Benji Trail NP barrel View Thread - Glover, Walter on Jul 11, 2012, 2:32 PM an alan wrench of the right size should fit in the top - JP MoneyShot on Jul 11, 2012, 3:42 PM Thank you, will check that soon - Glover, Walter on Jul 12, 2012, 12:06 PM A 1/4" Allen wrench and padded vise worked great! - Glover, Walter on Jul 13, 2012, 7:54 AM   Re: I'd like to hear from some Benji Katana owners....duplicate post- please delete nt. View Thread - JohnL57 on Jul 11, 2012, 1:34 PM   I'd like to hear from some Benji Katana owners.... View Thread - JohnL57 on Jul 11, 2012, 1:31 PM Don't see a lot about the Katana - Andy on Jul 13, 2012, 5:44 AM   Trigger shoe install.... big fail View Thread - dan house on Jul 10, 2012, 11:16 PM whats the trigger shoe made from? - robny on Jul 11, 2012, 5:01 AM Roll yer own - Andy on Jul 11, 2012, 5:10 AM Best $9.95 You Can Spend - Larry Miller on Jul 11, 2012, 6:13 AM yep thats what I got - dan house on Jul 11, 2012, 8:00 AM Be Careful - Anthony R on Jul 11, 2012, 8:30 AM just a clamp to old it still nt - dan house on Jul 11, 2012, 11:13 AM Sounds like Crosman's motto is: "If it's iron - HARDEN IT!" nt - Steve in NC on Jul 11, 2012, 8:31 AM Maybe file out the shoe instead? - Andy on Jul 11, 2012, 9:15 AM thats a thought - dan house on Jul 11, 2012, 11:16 AM And not just hard - dan house on Jul 11, 2012, 11:16 AM GMAC might have a nice brass one! ....n/t - Mark on Jul 12, 2012, 6:23 AM   Mounting rear sight on a Benjamin 397 View Thread - Pete Hallock on Jul 10, 2012, 4:07 PM i just did this not too long ago.. - Trevor on Jul 10, 2012, 5:31 PM Thingee-ma-Bob - Pete Hallock on Jul 10, 2012, 5:57 PM Metal Thingee... - Pete Hallock on Jul 10, 2012, 6:53 PM Sorry...no pixs - robert on Jul 10, 2012, 5:36 PM Skewers - Pete Hallock on Jul 10, 2012, 6:01 PM Re: Skewers - Trevor on Jul 10, 2012, 6:58 PM Its On.... - Pete Hallock on Jul 10, 2012, 7:26 PM No Factory Instructions - Pete Hallock on Jul 11, 2012, 8:35 AM Congrat's Pete. Now that it's on, you'll probably need to adjust it... - Steve in NC on Jul 11, 2012, 9:06 AM Thank you Steve ! - Pete Hallock on Jul 11, 2012, 9:37 AM Happy to help, Pete. nt - Steve in NC on Jul 11, 2012, 4:40 PM steve, what happens to the poi when you move the sight forward or back? - Trevor on Jul 11, 2012, 11:15 AM Not much. The fix for a POI that's too high even with the rear sight all the way down... - Steve in NC on Jul 11, 2012, 3:13 PM PS: I just remembered I made a (cool) sketch awhile back! - Steve in NC on Jul 12, 2012, 8:04 AM   The other half of PCPs View Thread - robert on Jul 10, 2012, 12:39 PM It's not all about power.... - rsterne on Jul 10, 2012, 4:46 PM Re: It's not all about power.... - Airfierce on Jul 10, 2012, 5:13 PM Yes it apparently is... - robert on Jul 10, 2012, 5:30 PM power comes with efficiency i think - Trevor on Jul 10, 2012, 7:01 PM Not that I've found... - robert on Jul 10, 2012, 7:33 PM Re: Yes it apparently is... - Curt on Jul 11, 2012, 6:17 AM its nto about power, really - dan house on Jul 10, 2012, 11:08 PM Another fan of moderate power pcp's. At 12-15 ft/lbs.. - scot laughlin on Jul 10, 2012, 11:24 PM Low power rocks! - Andy on Jul 11, 2012, 5:31 AM Not low power Andy, - dan house on Jul 11, 2012, 8:01 AM Another two thumbs up for moderate power. My regulated 10fpe Prod is a pussycat. - Steve in NC on Jul 11, 2012, 8:35 AM That's OUTSTANDING.... - rsterne on Jul 12, 2012, 4:46 PM Actually closer to 9 bar-cc/fpe. Fill pressure was indeed 3ksi... - Steve in NC on Jul 15, 2012, 10:18 PM   1322 scope and silencer questions View Thread - John on Jul 10, 2012, 12:19 PM Re: 1322 scope and silencer questions - Curt on Jul 10, 2012, 2:53 PM Silencers are LEGAL in 36 states - dan house on Jul 11, 2012, 4:28 PM Re: 1322 scope and silencer questions - Gary on Jul 10, 2012, 4:19 PM NcStar Makes a 2-7X Pistol Scope... - Pumpmeister on Jul 21, 2012, 1:15 PM   Question: Installing Disco Boss Valves View Thread - Jack Witas on Jul 10, 2012, 10:36 AM Re: Question: Installing Disco Boss Valves - Anonymous on Jul 10, 2012, 10:42 AM I would measure.... - rsterne on Jul 10, 2012, 10:44 AM lightly sand the threads - Robert on Jul 10, 2012, 11:08 AM Lightly sand the threads will work - buster on Jul 10, 2012, 12:11 PM Thanks for all your responses, guys. nt - Jack Witas on Jul 10, 2012, 12:14 PM You might try softer rings - A70 or 75. nt - Steve in NC on Jul 11, 2012, 9:02 AM Oring groove not cut to correct depth - Glover, Walter on Jul 11, 2012, 11:39 AM   Hold Sensitivity Of A 1377 View Thread - Larry Miller on Jul 10, 2012, 7:13 AM i had the same problem with a 24" barrel - Trevor on Jul 10, 2012, 8:50 AM Hmmm.... - Andy on Jul 10, 2012, 10:29 AM 1399 Stock Bolted To Frame Bottom... - Larry Miller on Jul 10, 2012, 11:54 AM Recoil ? - Curt on Jul 10, 2012, 2:46 PM Re: Hold Sensitivity Of A 1377 - ray carter on Jul 11, 2012, 12:00 PM   this is still bugging me View Thread - justin on Jul 10, 2012, 5:41 AM Nope, I think you did pretty good - dan house on Jul 10, 2012, 11:40 AM Re: Nope, I think you did pretty good - Airfierce on Jul 10, 2012, 5:02 PM   My SSP, I got rid of the delrin spacer that I had between the piston and valve, View Thread - james perotti on Jul 10, 2012, 5:22 AM interesting .. - robny on Jul 10, 2012, 3:12 PM I could'nt tell, but it's avg. 8.8fpe. with cpl's and I might be able - james perotti on Jul 11, 2012, 4:05 PM   anybody got any cool knives? View Thread - Trevor on Jul 9, 2012, 9:11 PM Yeah but this might be the wrong forum unless it Crosman knives - James S on Jul 9, 2012, 10:26 PM there's no off topic section here - Trevor on Jul 10, 2012, 8:25 AM Or accessories for Crosman guns? - Andy on Jul 10, 2012, 10:32 AM   Just finished my 1377c project View Thread - WyoMan on Jul 9, 2012, 7:21 PM Nicely Done First Shooter - Larry Miller on Jul 9, 2012, 7:50 PM Great start, and it looks good - Ian on Jul 9, 2012, 8:07 PM Nice I like the wood looks good ... - James S on Jul 9, 2012, 10:11 PM Drop in Trigger Assembly from GMAC - WyoMan on Jul 9, 2012, 10:21 PM Re: Drop in Trigger Assembly from GMAC - Airfierce on Jul 9, 2012, 11:35 PM Thanks for all the comments - WyoMan on Jul 10, 2012, 6:00 AM 'Yeah youv'e been bit hard - James S on Jul 10, 2012, 7:55 PM You are right James and I'd like - WyoMan on Jul 11, 2012, 4:44 AM   What the heck is a p-rod? View Thread - Michael Chavka on Jul 9, 2012, 12:09 PM I beg to differ... you obviously do know - dan house on Jul 9, 2012, 12:40 PM Looks like we struck a nerve.... - Michael Chavka on Jul 9, 2012, 3:50 PM Yikes, just took a closer llok - dan house on Jul 9, 2012, 4:47 PM It's a Custom Adapter. - Michael Chavka on Jul 9, 2012, 7:07 PM Re: It's a Custom Adapter. - Noah on Jul 9, 2012, 8:26 PM Truly beautiful... - Matheus Pires on Jul 10, 2012, 6:54 AM The wood looks great, never understood - Brushy Bill on Jul 10, 2012, 9:58 AM heheh ok, I should have used this joke earlier..... - dan house on Jul 11, 2012, 4:42 PM Leave it to you know who - Michael Chavka on Jul 13, 2012, 8:18 AM   revisiting the other forums 25 caliber ssp project ideas ,maybe we are all wrong View Thread - robny on Jul 9, 2012, 11:52 AM now youve really complicated it - dan house on Jul 9, 2012, 12:01 PM yes the gun would need 2 footing points for the ground but look at it this way - robny on Jul 9, 2012, 12:20 PM Man portable.... not crew served - dan house on Jul 9, 2012, 12:42 PM given a lever long enough, and a place to stand, i can make. 20 fpe ssp! lol. - robny on Jul 9, 2012, 12:45 PM Re: revisiting the other forums 25 caliber ssp project ideas ,maybe we are all wrong - Curt on Jul 9, 2012, 2:43 PM well you could jump on the pump arm. - robny on Jul 9, 2012, 3:07 PM Maybe get a couple of gun bearers - Andy on Jul 10, 2012, 10:15 AM lmao..mount to the tree with straps..hang from pump arm.nt - robny on Jul 10, 2012, 5:25 PM   space between pellet and transfer port View Thread - Trevor on Jul 9, 2012, 10:14 AM Theoretically.... - rsterne on Jul 9, 2012, 10:20 AM Buy a spare - dan house on Jul 9, 2012, 10:24 AM Re: Buy a spare - Trevor on Jul 9, 2012, 10:35 AM My experience has pointed toward longer being better - scot laughlin on Jul 9, 2012, 6:22 PM Re: space between pellet and transfer port - Curt on Jul 9, 2012, 1:52 PM   I just found out about this group , View Thread - James Shuff on Jul 9, 2012, 6:07 AM Go to the index on this forum and check crosman tech! - Don on Jul 9, 2012, 8:22 AM What Don said - dan house on Jul 9, 2012, 8:58 AM Re: What Don said - James Shuff on Jul 9, 2012, 10:54 AM Hi James - Anonymous on Jul 9, 2012, 1:24 PM   whats the limit to gas rams..a tiny one would be super appealing View Thread - robny on Jul 8, 2012, 8:07 PM a tiny one to use as a hammer spring would be cool i think - Trevor on Jul 8, 2012, 9:46 PM thats genius - robny on Jul 8, 2012, 10:30 PM GREAT IDEA!!!!!!..... NT. Greg - Greg Lundy on Jul 10, 2012, 11:54 AM Re: whats the limit to gas rams..a tiny one would be super appealing - Andy on Jul 9, 2012, 3:59 AM lmao! - robny on Jul 9, 2012, 5:13 AM Re: whats the limit to gas rams..a tiny one would be super appealing - Dick Tracey on Jul 18, 2012, 5:40 PM   need help diagnosing my 1377 malfunction.... View Thread - DF in NY on Jul 8, 2012, 4:46 PM well we have 2 factors ..the pump mechanism and the valve - robny on Jul 8, 2012, 4:57 PM Occasionally the rubber piston cup comes loose from the plastic piston rod. When that... - Steve in NC on Jul 8, 2012, 7:03 PM thanks guys - DF in NY on Jul 8, 2012, 7:18 PM   Compressing air... View Thread - Airfierce on Jul 8, 2012, 11:26 AM Not much happening with airguns at pressures less than 1000 psi - Cal on Jul 8, 2012, 11:42 AM the shoebox is the current leader in practicality. nt - robny on Jul 8, 2012, 12:34 PM Re: Compressing air... - Curt on Jul 8, 2012, 4:38 PM Re: Compressing air... - Airfierce on Jul 8, 2012, 5:52 PM   guys as it applies to crosman what do we need steve in nc to invent next? View Thread - robny on Jul 8, 2012, 11:06 AM a self-pumping pneumatic - Trevor on Jul 8, 2012, 2:04 PM i was thinking a turbine induction transfer port that accelerates air like a dyson lol - robny on Jul 8, 2012, 4:12 PM not necessary unique to crosman - dan house on Jul 8, 2012, 6:21 PM i totally agree..i cannot do the math - robny on Jul 8, 2012, 8:01 PM Math and cheat sheets - Curt on Jul 9, 2012, 6:11 AM I can do the math - dan house on Jul 9, 2012, 8:35 AM Reduce Benjamin 397 Pumping effort.. - Pete Hallock on Jul 11, 2012, 8:44 AM Steve has that handled already! - Andy on Jul 11, 2012, 9:18 AM Perfect ! - Pete Hallock on Jul 11, 2012, 9:40 AM   My bulked 2240 stopped shooting. View Thread - Mike on Jul 8, 2012, 12:05 AM valve lock? - john on Jul 8, 2012, 6:44 AM you should be able to - eric on Jul 8, 2012, 1:43 PM Thanks for the advice. - Mike on Jul 8, 2012, 2:50 PM i won't think so - eric on Jul 8, 2012, 2:57 PM Valve lock is not common on CO2.... - rsterne on Jul 8, 2012, 2:58 PM Re: Valve lock is not common on CO2.... - Curt on Jul 8, 2012, 5:16 PM Gun was in the trunk for 7 days. - Mike on Jul 8, 2012, 10:43 PM If you're saying it was hot.... - rsterne on Jul 9, 2012, 10:08 AM   P Rod in .25? View Thread - dan house on Jul 7, 2012, 10:33 PM Number of shots.... - rsterne on Jul 7, 2012, 11:03 PM well one was made by using a - robny on Jul 8, 2012, 2:10 AM might be better off - dan house on Jul 8, 2012, 6:32 PM joking but true dan - robny on Jul 8, 2012, 9:33 PM Dont whant a longer barrel - dan house on Jul 9, 2012, 8:37 AM yep.but it helped alot well worth the price..i just think that more volume was needed.nt - robny on Jul 9, 2012, 11:47 AM Yes it was very worth it, and yest it needs more volume - dan house on Jul 9, 2012, 12:03 PM   Crosman Mk1 View Thread - Bryan Enoch on Jul 7, 2012, 9:21 PM mark l - mark ll on Jul 8, 2012, 7:06 AM Love Affair With The Mark Pistols - Larry Miller on Jul 8, 2012, 7:10 AM In my humble opinion - andy on Jul 8, 2012, 10:18 PM Thanks for the replies - Bryan Enoch on Jul 9, 2012, 8:40 PM Call him, he has the,, - Art Burciaga on Jul 10, 2012, 1:06 AM   hey guys look what greg was nice enough to make for my 2003 ,,,!!!!! View Thread - robny on Jul 7, 2012, 6:41 PM re-sized it for you Robny - buster on Jul 7, 2012, 6:53 PM thanks man.nt - robny on Jul 7, 2012, 7:30 PM YW .before it looked - buster on Jul 7, 2012, 7:38 PM Sorry Guys!!..... For image size..... - Greg Lundy on Jul 7, 2012, 8:16 PM its totally my phone no biggie! nt - robny on Jul 8, 2012, 10:32 PM Nice billet, - Ian on Jul 7, 2012, 9:24 PM I'm guessing cyclic rate reduction nt - dan house on Jul 7, 2012, 9:34 PM its a block of cast lead to slow down the cyclic rate on my - robny on Jul 8, 2012, 11:05 AM Good on ya Greg! - dan house on Jul 7, 2012, 10:02 PM not to mention - robny on Jul 8, 2012, 2:13 AM   crosman 357w View Thread - john on Jul 7, 2012, 6:21 PM Re: crosman 357w - john on Jul 7, 2012, 6:41 PM Re: crosman 357w - Anonymous on Jul 8, 2012, 6:14 AM Nope....single action is way better for me (pic) - scot laughlin on Jul 8, 2012, 9:02 PM Re: Nope....single action is way better for me (pic) - john on Jul 10, 2012, 9:57 AM   just got a brand new HB22 View Thread - Trevor on Jul 7, 2012, 4:21 PM WTF did i do? - Trevor on Jul 7, 2012, 9:29 PM o-rings - john on Jul 8, 2012, 1:40 PM   james P..can you share more pictures of your devilish ssp? nt View Thread - robny on Jul 7, 2012, 2:54 PM phil posted link below..thx. - robny on Jul 7, 2012, 6:23 PM   In counterpoint to recent interest in converting MSPs to SSPs... View Thread - Steve in NC on Jul 7, 2012, 11:50 AM quite elegant steve....buttt is it - robny on Jul 7, 2012, 2:17 PM Idiot proof installation? - Curt on Jul 7, 2012, 4:32 PM hahahahaa - robny on Jul 7, 2012, 4:48 PM LOL! I can't compete with Curt's curt reply, but it's really pretty straightforward. - Steve in NC on Jul 7, 2012, 6:03 PM seems pretty simple! nt - robny on Jul 7, 2012, 6:19 PM What makes it even moreso is that lots of talented folks have posted lots of Izzy... - Steve in NC on Jul 7, 2012, 6:33 PM HERESS THE BURNING QUESTION - robny on Jul 7, 2012, 6:43 PM Impossible. The Izzy was the last that needed improvement. Now they're ALL perfect. - Steve in NC on Jul 7, 2012, 7:05 PM ummmmmmmmmmmmmmm - robny on Jul 8, 2012, 2:14 AM LOL! You're a good sport, Rob. But more seriously... - Steve in NC on Jul 8, 2012, 8:23 AM The 46 is on my short list of guns to get - dan house on Jul 7, 2012, 2:39 PM We've conservatively rated it for a 100% power increase over stock with 8 pumps. - Steve in NC on Jul 7, 2012, 5:01 PM cool. - dan house on Jul 7, 2012, 10:32 PM The VIP'd Izzy would respond very well to a longer barrel. - Steve in NC on Jul 7, 2012, 11:11 PM   My SSP is together enough to shoot, I still have to test View Thread - james perotti on Jul 7, 2012, 9:34 AM wow!!! - robny on Jul 7, 2012, 9:38 AM Thanks Rob. n/t - james perotti on Jul 7, 2012, 10:09 AM That's great news, James, and already impressive performance. But... - Steve in NC on Jul 7, 2012, 9:47 AM Yes there's still a number of issues. The pump lever is - james perotti on Jul 7, 2012, 10:21 AM Remind me, please. How long is that spacer? I ask because... - Steve in NC on Jul 7, 2012, 10:38 AM The spacer is 3/4" long, but does not change the stroke lenght. n/t - james perotti on Jul 7, 2012, 12:00 PM Well, if the stroke could be made 3/4" longer, wouldn't the spacer go away and... - Steve in NC on Jul 7, 2012, 12:04 PM The linkage geometry gives a stroke lenght of 8.5" I use - james perotti on Jul 7, 2012, 12:12 PM Perfectly. Thanks. In other news, I wonder... - Steve in NC on Jul 7, 2012, 12:20 PM Yes, all the little losses add up, at some point I'll build another - james perotti on Jul 7, 2012, 2:50 PM Hooray! Now, here's my address... - Phil on Jul 7, 2012, 10:53 AM That is smokin' for a SSP. nt - Lon on Jul 7, 2012, 10:55 AM Thanks Lon, The Titan Mohawk SSP version in .177 - james perotti on Jul 7, 2012, 12:05 PM Pics or a link? - dan house on Jul 7, 2012, 2:43 PM Mostly scratch built, - james perotti on Jul 7, 2012, 2:53 PM NW 54 link with SSP pictures. Enjoy! - Phil on Jul 7, 2012, 3:17 PM thanks..i had forgotten wherre they were..nt - robny on Jul 7, 2012, 6:23 PM Oh yea I remember that - dan house on Jul 7, 2012, 9:54 PM   electrical tape as a tuning tool? View Thread - justin on Jul 7, 2012, 2:20 AM Good temp fix, but..... - Mark on Jul 7, 2012, 3:12 AM it never occurred to me... - justin on Jul 7, 2012, 4:18 AM Re: electrical tape as a tuning tool? - Andy on Jul 7, 2012, 5:00 AM Prototype.... - Curt on Jul 7, 2012, 5:27 AM Re: Prototype.... - Andy on Jul 7, 2012, 7:46 AM lmao..ive used almost everything u have listed - robny on Jul 7, 2012, 9:35 AM ive used almost everything - Curt on Jul 7, 2012, 4:27 PM RE: seemingly weird or unusual fixes - Craig on Jul 7, 2012, 9:57 AM I doubt it will last very long. - Lon on Jul 7, 2012, 10:54 AM AHH no stop!! - dan house on Jul 7, 2012, 10:09 PM already have taken the tape out. - justin on Jul 8, 2012, 7:42 PM   Dan House, if you need P-Rod TP's, contact me. View Thread - Mark G. on Jul 7, 2012, 12:25 AM thanx mark - dan house on Jul 7, 2012, 10:24 AM Yes sir, I'll be at the Nats. Gotta help run the show. - Mark G. on Jul 8, 2012, 8:39 AM   can anyone think of a lead block about 3/4 by 3/4 made for any purpose i can addd to 2003 View Thread - robny on Jul 6, 2012, 7:26 PM Any possibility of making a mold and casting the shape you need... - Steve in NC on Jul 6, 2012, 8:36 PM maybe - robny on Jul 6, 2012, 10:37 PM Perhaps some sheet lead.... - rsterne on Jul 6, 2012, 11:28 PM Been forming lead since I was knee high, - CO222 on Jul 7, 2012, 2:07 AM Re: can anyone think of a lead block about 3/4 by 3/4 made for any purpose i can addd to 2003 - Curt on Jul 7, 2012, 5:28 AM Lead Block - Greg Lundy on Jul 7, 2012, 5:54 AM i sent you a gmail! thanks - robny on Jul 7, 2012, 11:51 AM Re: can anyone think of a lead block about 3/4 by 3/4 made for any purpose i can addd to 2003 - TheDuke13 on Jul 7, 2012, 7:46 AM THANKS EVERYONE GREG IS MAKING ME LEAD BLOCKS! UPDATES SOON - robny on Jul 7, 2012, 2:21 PM MISSION ACCOMPLISHED!!!!! Gmail sent........ - Greg Lundy on Jul 7, 2012, 4:16 PM   i was wondering... View Thread - justin on Jul 6, 2012, 3:45 PM Our own Steve n NC is a trigger Guru - dan house on Jul 6, 2012, 4:04 PM Most of the Crosman breakbarrels will accept either the GTX or NCT... - Steve in NC on Jul 6, 2012, 5:16 PM guess that answers my question. but - justin on Jul 7, 2012, 1:57 AM No worries, Justin. I understand all too well that obsession-with-airguns thing. Me too! - Steve in NC on Jul 7, 2012, 8:11 AM    << Prev  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28    Next >>

Visitors in this forum in the last 10 minutes: 14 Visitors
14 guests