photo toplogo1_zps46807118.jpg

 photo americlps_zpsavfgvdau.jpg

Dag Evert's "American Classic"

As mentioned on the forum, heres a picture I took some time back, with natural winter daylight.
A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play,
contact surfaces stoned, and trigger springs somewhat reduced within safe limits.
The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)
-- Dag Evert

  << Previous Topic | Next Topic >>Return to Index  

new poster with Crosman 130

October 1 2006 at 8:04 AM
gifford49  (Login gifford49)
from IP address 65.66.158.221

Morning All; decided to get my old Crosman 130 .22 caliber air pistol back into shooting condition. I bought it in the early 60's and has been residing in the footlocker since 1970. It's in great shape but, as usual, won't hold a charge. Found quite a few posts about these and plan to contact a rebuilder. Any recommendations for a rebuild? Thanks.

 
 Respond to this message   
AuthorReply
Tony
(Login aslap)
Crosman Forum Member
67.165.84.176

130 rebuild

October 1 2006, 8:35 AM 

I did mine a little while back - same vintage. You can get the seal kits from a number of places. I used Bryan and Associates for mine.

I was easy to do and the gun shoots great!!

Tony

 
 Respond to this message   
gifford49
(Login gifford49)
65.66.158.221

130 rebuild

October 1 2006, 10:06 AM 

Thanks Tony.

 
 Respond to this message   

CAGS
(Login CAGS)
Crosman Forum Member
71.67.243.208

Alan at AB airgun

October 1 2006, 3:21 PM 

can rebuild it for you, or sell you the seals to do it yourself, great guy to deal with

Best Regards
CAGS

For vintage airguns and custom amde slingshots for sale visit my webpage:
http://airgunhut.4t.com/

 
 Respond to this message   
Anonymous
(Login gifford49)
69.148.23.80

Re: Alan at AB airgun

October 1 2006, 4:55 PM 

Yes he is, gave him a call and we had nice visit about my ol' 130. We'll be doing some business this week.

 
 Respond to this message   
gifford49
(Login gifford49)
69.148.23.80

Re: Alan at AB airgun

October 1 2006, 4:57 PM 

hmm. fixed it now.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member