logo by smgunner

Dean's HiPac 2240

Tactical Trijicon ACOG TA01 Style 4x32 Cross Sight Rifle Scope + Kill Flash
TROBB Solid Aluminium Dovetail Power Block with Gmac hollow probe and G-mac Bolt
Gmac Brass Power Adjuster Spring And Guide/Drilled Out Standard Valve For more air space
Hammer Mods//Gmac 30% Lighter valve Spring/Gmac Brass Safety Catch//Transfer port drilled out
Full Gmac Trigger kit/Gmac barrel cut to 9inch/Weihrauch Silencer/Custom Home Made Grips/
New TRACER LEDRAY GL2 LAMP 90m Range Beam//HI-Pac

  << Previous Topic | Next Topic >>Return to Index  

Barrel shrouds and/or air strippers for a Mark 1

June 10 2011 at 6:52 AM
  (Login javagonzo)
Crosman Forum Member
from IP address 12.231.44.66

Hi.
I'm leaving the stock barrel on my Mark I but am looking at replacing the stock, tapered shroud with a constant diameter (something reminiscent of a bull barrel) shroud and possibly adding an air stripper. Does anyone have recommendations for such beasts?

Thanks,
Chris

 
 Respond to this message   
Current Topic - Barrel shrouds and/or air strippers for a Mark 1
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486