logo by smgunner

Dean's HiPac 2240

Tactical Trijicon ACOG TA01 Style 4x32 Cross Sight Rifle Scope + Kill Flash
TROBB Solid Aluminium Dovetail Power Block with Gmac hollow probe and G-mac Bolt
Gmac Brass Power Adjuster Spring And Guide/Drilled Out Standard Valve For more air space
Hammer Mods//Gmac 30% Lighter valve Spring/Gmac Brass Safety Catch//Transfer port drilled out
Full Gmac Trigger kit/Gmac barrel cut to 9inch/Weihrauch Silencer/Custom Home Made Grips/
New TRACER LEDRAY GL2 LAMP 90m Range Beam//HI-Pac

  << Previous Topic | Next Topic >>Return to Index  

Wood stock for 1377

February 21 2012 at 1:20 PM
  (Login airsnyper)
Crosman Forum Member
from IP address 66.13.40.242

Does anyone know where I can get the wood forearm for the 1377 only. and instead of wood grips, a grip that extends to the back into a shoulder stock?

Thanks

 
 Respond to this message   
AuthorReply


(Login robnewyork)
Crosman Forum Member
108.21.103.165

you mean a custom piece???

February 21 2012, 1:25 PM 

or was there an old factory piece??If you mean custom , airgun andy and dan house on here have done amazing foregrip work , I dont know what they would charge .

[linked image]
"i never was much for book learnin"

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

Its the pistol grip

February 21 2012, 1:29 PM 

that cuases all the trouble. Even if you cut it way down, it still positions the trigger itself just aft of the midpoint on the pump tube.

Depneds on what your after.... if you dan live with/dont mind the pistol grip and trigger placement, Steve Corcoran (sorry Steve, probably spelled it wrong)  has some awesome stocks

If you feel the need to lose the pistol grip frame, then you'll need a trigger pack of some sort.....  



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   

(Login airsnyper)
Crosman Forum Member
66.13.40.242

like the 1399 stock for the 1377

February 21 2012, 1:51 PM 

but in wood.

kind of like the LD stocks that Steve Cororan has. but is only from the grips, not the forearm, as it is pump in the 1377.

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

Gotcha

February 21 2012, 1:59 PM 

give Rick a lookie : http://www.airgrips.com/

he's done them in the past.....

 



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   


(Login robnewyork)
Crosman Forum Member
108.21.103.165

i see

February 21 2012, 2:01 PM 

SO ITS JUST GRIPS AND FOREARM?? that is ricks field and he isnt expensive at all compared to the price of full on stocks.

[linked image]
"i never was much for book learnin"

 
 Respond to this message   

(Login airsnyper)
Crosman Forum Member
66.13.40.242

yes custom wood stock

February 21 2012, 1:41 PM 

like you would see on an old stock for the S200, where the pistol grip extends into the stock and has a cheek piece.

 
 Respond to this message   


(Login robnewyork)
Crosman Forum Member
108.21.103.165

If you dont wanna spend 400bux

February 21 2012, 1:43 PM 

email Dan house dhouse@montana.edu , Or airgunandy(i have to look for his email addy), they are both reserved and modest and will not contact you for the work... some of their work is featured here

http://www.network54.com/Forum/79537/message/1321374138/Crosman+760+Build-Off+Winner%21

[linked image]
"i never was much for book learnin"

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

Like a thumbhole?

February 21 2012, 1:48 PM 

Or like I did for the 1377 constest? http://www.network54.com/Forum/275684/thread/1327907437/Contest+entry

I used a modidifed grip frame (hehe modified.... mutilated might be a better word...). but it can be down.

Andy might have some words of wodden wisdom in that regard.....



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   


(Login robnewyork)
Crosman Forum Member
108.21.103.165

dan wheres the foregrip pic on your tube gun???

February 21 2012, 1:58 PM 

thats a perfect example for a non pinching handle

[linked image]
"i never was much for book learnin"

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

didnt realize how far backt aht was

February 21 2012, 2:07 PM 

http://www.network54.com/Forum/275684/thread/1325786978/This+is+not+my+Build+Off+entry

only been like 6 weeks.....



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   


(Login robnewyork)
Crosman Forum Member
108.21.103.165

the wood work on the rear piece was most impressive,i always remember that,.nt

February 21 2012, 2:17 PM 



[linked image]
"i never was much for book learnin"

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

Yes, the skunkwerks guys have perfected anodizing wood

February 21 2012, 2:56 PM 

used to be able to get the stuff in green locally, but ive not been able to fnd it.....

The tube gun was supposed to be green,,,,,  



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   


(Login robnewyork)
Crosman Forum Member
108.21.103.165

lol, anodized wood, it does look like its anodized metal though, good result.

February 21 2012, 5:32 PM 

thats why i was suprised u changed substrates./

[linked image]
"i never was much for book learnin"

 
 Respond to this message   

airgunandy
(Login airgunandy)
Crosman Forum Member
206.208.93.60

Something like Crosman plastic stock or ...

February 21 2012, 1:59 PM 

something like these...
[linked image]
[linked image]

These were made from three layers of plywood, the middle layer cut to fit the back strap of the grip frame before gluing together.

I plink, therefore I am.

 
 Respond to this message   


(Login robnewyork)
Crosman Forum Member
108.21.103.165

thats so wild , love the top color ! nt

February 21 2012, 2:02 PM 



[linked image]
"i never was much for book learnin"

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

andy, whats that piece just ahead of the red dot?

February 21 2012, 2:09 PM 

looks like a 1377 pump handle turned upside down?



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   


(Login airgunandy)
Crosman Forum Member
206.208.93.60

You mean under the red dot?

February 21 2012, 2:22 PM 

Give that man a cigar!
Yes that's a 1377 forearm turned into a handguard.

I plink, therefore I am.

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

Cool!

February 21 2012, 2:50 PM 

glad its good for something..... I have a couple,,,gonna hve to look at them with fresh ideas now.....

dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   


(Login airgunandy)
Crosman Forum Member
206.208.93.60

1377 handguard

February 21 2012, 2:55 PM 

I filled the front roll pin hole in on both sides and then ran allen head set screws into both ends of the rear roll pin hole. This locks the piece to the barrel.

I plink, therefore I am.

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

yea, think I'm gonna have to use that

February 21 2012, 2:59 PM 

"Andy's Handy-gard" happy.gif

dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

AirSnyper I hope we answered yer Q's

February 21 2012, 2:54 PM 

especially since we hijacked yer thread.....

dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   

(Login airsnyper)
Crosman Forum Member
66.13.40.242

don't see any.

February 21 2012, 2:57 PM 

i went to airgrips and nothing.

it would look like the 1399 stock, but in wood instead of plastic, but it would not be hollow in the middle and have a raised cheek piece. i think RB made some for the LD before.

 
 Respond to this message   

dan house
(Login dan_house)
Crosman Forum Member
153.90.162.47

Ok, I'm starting to track now

February 21 2012, 3:00 PM 

lemme draw something up.....



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   

(Login airsnyper)
Crosman Forum Member
66.13.40.242

something like this

February 21 2012, 3:10 PM 

either with the middle hollow or not

just from the pistol grip part

[IMG][linked image][/IMG]

 
 Respond to this message   

(Login airsnyper)
Crosman Forum Member
66.13.40.242

or like this

February 21 2012, 3:13 PM 

just look at the buttstock, it goes to the pistol grip part only.

[IMG][linked image][/IMG]

 
 Respond to this message   


(Login airgunandy)
Crosman Forum Member
206.208.93.60

Maybe this?

February 21 2012, 3:25 PM 

[linked image]

I plink, therefore I am.

 
 Respond to this message   

(Login airsnyper)
Crosman Forum Member
66.13.40.242

yes. nt

February 21 2012, 3:27 PM 

.

 
 Respond to this message   

dan_house
(Login dan_house)
Crosman Forum Member
153.90.162.47

Andy's already got the thing tooled up

February 21 2012, 3:27 PM 

hehehe

Keep us posted! I'll start drawing when I get home



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   


(Login robnewyork)
Crosman Forum Member
108.21.103.165

andy is in the shop right now chugging coffee and warming up the bandsaw nt

February 21 2012, 3:31 PM 


[linked image]
"i never was much for book learnin"

 
 Respond to this message   


(Login airgunandy)
Crosman Forum Member
206.208.93.60

Re: don't see any.

February 21 2012, 3:10 PM 

Yeah he quit making the all wood shoulder stocks. Now he just does wood inserts for the 1399 stock.

I plink, therefore I am.

 
 Respond to this message   
Current Topic - Wood stock for 1377
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486