Been working on it, still needs more work.
* Long awaited aluminum breech, that I screwed up and had to make into a standard height breech (suppose to be a high rise)
* Weaver Rails cut and fitted
* Simmons (I think it is) 3x9x40
* Pump Arm Cap - Brass & Aluminum so I could free float the barrel and add my SS shroud (can't now until I make a riser and also have a brass ring to fill up the space between cap and tube forgotten at work)
* Cocobolo Pump Arm (Rick's Grips) and Stock Insert (RB Grips)

Still to come;
* Flat-tops and a little valve porting/polishing
* 6mm Transfer Port Mod
* Riser and SS Shroud
* Correct .22 SS Long Probe Experimental Bolt and Handle (using a .177 cal bolt with an oversize o-ring now)

Rich

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

love the wood. the red really stands out

 

whose breech?

dr_subsonic's pneumatic research lab

the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

I've done a 3/16" TP mod on My 1322

So, 6mm(that's like .243"?) I imagine that will get a lot of air in the Barrel for sure!

BTW...What wood in the Stock insert?

Keep it going! Have fun!

Mario

Lock - N - Load!

Sorry for the confusion. Someone posted this up somewhere and I saved the pic to remind me. Use a 6mm set screw, drill though .170" or so and tap your valve for it. Turn down a shoulder for the o-ring to mate with the barrel. When adjusted properly, you should have no leaks at all. I thought it to be a brilliant idea.
I'll post a pic or link later. Have to head out to work now.

The mod was brought up by a guy named Pete over on the GTA site. Here is the link.
http://www.gatewaytoairguns.org/GTA/index.php/topic,23102.msg209063.html#msg209063


Rich

[IMG][/IMG]