The (new) Crosman Forum, your first and last stop for all things Crosman

 photo TW_custom_pc77_r_zpslyddcslm.jpg

Tom West's Custom PC77 PumpMaster Classic Short Rifle

  << Previous Topic | Next Topic >>Return to Index  

Sheridan/Benji 392/Sharp innova Silencer adapters !

May 14 2012 at 1:39 PM
Ged  (Login gedfinn)
Crosman Forum Member
from IP address

Hi, I read the thread a couple of posts down on the above subject,
About 3-5 Years ago I made a batch of these & Others ,Crosman 140/400 & Others, Etc,

I only have one left from each batch ! What do you think ? Ged.

Sheridan -[IMG][linked image][/IMG]

Sheridan-[IMG][linked image][/IMG]

Sharp, Some with & some without Foresight !
[IMG][linked image][/IMG]

Some Innova adapters & My last Innova Aluminium breech !!!
[IMG][linked image][/IMG]

All the Crosman 140 & The 392,s were in the same format as the Sheridan one .

 Respond to this message   

(Login robnewyork)
Crosman Forum Member

nice job ged

May 14 2012, 2:30 PM 

These would seem to have a niche market..any news on the dual springer?

[linked image]
"i never was much for book learnin"

 Respond to this message   

(Login xposo)
Crosman Forum Member

You making any more?

May 14 2012, 6:40 PM 

Both look great, how about making more up, I'd buy one.

S.W.A.G. it!

 Respond to this message   
(Login 21grains)
Crosman Forum Member

My Innova,much more Power than Dan,Benji,Cros

May 15 2012, 9:39 AM 

Have Sharp Innova,got it Mail order from UK early 80's. Barrel threaded 1/2 and suplied w/UK LDC in box NC.N0 Lead Dust Excapes at all, none! People ask is it Broken or how do You make it Go,Nuff Said.....Franky

 Respond to this message   
(Login gedfinn)
Crosman Forum Member

Innova,s ?

May 16 2012, 7:14 AM 

Whats he talking about !!!!!!!

A threaded barrel on an Innova does not work as a silencer adapter ?
I still have about 8, or 9, & a couple of Aces retired to the loft,
[IMG][linked image][/IMG]
[IMG][linked image][/IMG]

I still have a list of the factory numbers for Sheridan & Sharp, IE Pumps to output ?
The Ace comes out top,( It has a longer barrel than the Innova ) Yes, The Sharp total loss valve is the best,

My modded Innova does 11.3 Fpe on 3, pumps, This is acheived by shortening the air chamber ( Up to 20mm ) & Increasing the swept volume,

 Respond to this message   

(Login 22MK1)
Crosman Forum Member

Ssnake made a couple for Sheridans

May 20 2012, 2:52 PM 

They were machined end caps/cans with a slip fit over the barrel
held in place by the pivot pin. I recall he sold both a streak and a pistol so equipped. I tried finding a picture of one searching the yellow classifieds to nought.
He had offered the drawings to anyone who wants to make them as the were only a "two or three off for his own use. Someone had asked if he would make more after seeing one on the pistol on the classifieds.
I'd be a little leery of hanging that much weight & leverage on such a short piece of brass barrel with a grub screw. On a 140/1400 it would be great although all of mine are a lot quieter than my Sheridans ans Steroid 342.

This message has been edited by 22MK1 from IP address on May 20, 2012 2:54 PM

 Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member