photo toplogo1_zps46807118.jpg

 photo americlps_zpsavfgvdau.jpg

Dag Evert's "American Classic"

As mentioned on the forum, heres a picture I took some time back, with natural winter daylight.
A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play,
contact surfaces stoned, and trigger springs somewhat reduced within safe limits.
The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)
-- Dag Evert

  << Previous Topic | Next Topic >>Return to Index  

Crosman RM-877 / Mendoza RM800 Question

June 13 2012 at 5:35 PM
Dennis  (Login mafatone)
Crosman Forum Member
from IP address 69.141.51.82

Does anyone know what stocks are interchangeable with this as I have a RM-877 that needs a stock.Would the RM-622 and what others fit? Anyone know where I could get my hands on a stock,thumbholed or not? Thank You..........

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way

Information presented in this forum is intended for informational purposes only; use at your own risk

Posts made to this forum are soley the opinion of the individual member