logo by smgunner

  << Previous Topic | Next Topic >>Return to Index  

good point andy , i planned around the 417 where the barrel band is a non issue

August 10 2012 at 11:01 PM
  (Login robnewyork)
Crosman Forum Member
from IP address 69.127.160.231
On the 760 the band location on the pump arm will now be gone.we will have to see where this goes..maybe ill need to install on 417 afterall.

[linked image]
"i never was much for book learnin"

 
 Respond to this message   
AuthorReply

Andy
(Login airgunandy)
Crosman Forum Member
65.190.155.55

417 has a barrel band too

August 11 2012, 4:53 AM 

I've seen it. Why is it not an issue?

Maybe a 2240 barrel band and a spacer to make it fit on the 5/8" OD bulk fill adapter?

I plink, therefore I am.


    
This message has been edited by airgunandy from IP address 65.190.155.55 on Aug 11, 2012 5:02 AM
This message has been edited by airgunandy from IP address 65.190.155.55 on Aug 11, 2012 4:54 AM
This message has been edited by airgunandy from IP address 65.190.155.55 on Aug 11, 2012 4:53 AM


 
 Respond to this message   


(Login robnewyork)
Crosman Forum Member
69.127.160.231

yep

August 11 2012, 8:17 AM 

The external piece of the adapter unit has a bigger i.d, will have to now incorporate this into the design.setting me back a bit., u are 2 steps ahead of me andy, thanks

[linked image]
"i never was much for book learnin"


    
This message has been edited by robnewyork from IP address 69.127.160.231 on Aug 11, 2012 8:50 AM


 
 Respond to this message   
Current Topic - good point andy , i planned around the 417 where the barrel band is a non issue
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486