The (new) Crosman Forum, your first and last stop for all things Crosman


Jim Gillilan's Custom 1322 Carbine

Jim Gillilan's Custom 1322 Carbine w/Custom Stock

Here's one I'm especially proud of and is modded all over, doing 12fpe at 15 pumps.
Stock is Teak from Thailand and super light weight 1322 Carbine!

  << Previous Topic | Next Topic >>Return to Index  

A tale of two 760s.......

April 21 2017 at 1:16 PM
Ronald  (Login GunNut10)
Crosman Forum Member
from IP address 104.12.88.15

I picked up a 78 Crosman 760 from EBay and replaced the plastic stock with a wood stock made from a Ruger 10/22.
It wouldn't hold pressure but a new valve stem and reseal fixed that.

The plastic "86" version weighs 2 pounds 13 onces and the "78" weighs just a tad over 5 pounds.
The wood stock is 1 pound 3 ounces.

I'm thinking to FT the piston and valve and increase the stroke to 4"+.
Maybe a Challenger barrel too.

[linked image]

[linked image]

Ronald


    
This message has been edited by GunNut10 from IP address 104.12.88.15 on Apr 21, 2017 1:23 PM


 
 Respond to this message   
AuthorReply
John Thomas in Spokane
(Login jcl08)
Crosman Forum Member
97.115.163.134

Found one I see. The Ruger stock looks good on it. Happy modding. NT

April 21 2017, 5:36 PM 


 
 Respond to this message   
Ronald
(Login GunNut10)
Crosman Forum Member
104.12.88.15

This one was in geat shape and......

April 22 2017, 6:49 AM 

they don't come up very often so I pulled the trigger.
Should be a good platform for an upgraded all metal and wood 760.
Not that I need another air gun.

Ronald


    
This message has been edited by GunNut10 from IP address 104.12.88.15 on Apr 22, 2017 7:03 AM


 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member