The (new) Crosman Forum, your first and last stop for all things Crosman


Jim Gillilan's Custom 1322 Carbine

Jim Gillilan's Custom 1322 Carbine w/Custom Stock

Here's one I'm especially proud of and is modded all over, doing 12fpe at 15 pumps.
Stock is Teak from Thailand and super light weight 1322 Carbine!

  << Previous Topic | Next Topic >>Return to Index  

Where to get a factory disco valve? Crosman on backorder :(

May 12 2017 at 3:52 PM

ray1377  (Login ray1377)
Crosman Forum Member
from IP address 72.156.120.35

any ideas?
Thanks
Ray

 
 Respond to this message   
AuthorReply
TK
(Login Tinknocker66)
Crosman Forum Member
107.216.50.48

Re: Where to get a factory disco valve? Crosman on backorder :(

May 12 2017, 4:31 PM 

mountainair maybe

 
 Respond to this message   
michael wolfram
(Login marflow)
Crosman Forum Member
73.239.66.134

is mthis what you need inside

May 12 2017, 10:00 PM 


 
 Respond to this message   

Bio
(Login Biohazardman)
Moderator
71.236.167.69

Re: Where to get a factory disco valve? Crosman on backorder :(

May 13 2017, 9:28 AM 

Many internet airgun sites would have them as well as authorized Crosman repair shops there are more than what is listed on map. I actually have one right down the street. https://www.crosman.com/general/find-a-service-center
I used to have a life. But now I have the forum. I am a sick man?

[linked image]

 
 Respond to this message   
BillK
(Login BillKE4)
Crosman Forum Member
24.247.59.143

Magnum Air has them.......

May 13 2017, 11:09 AM 


 
 Respond to this message   
raneman
(Login ranedouglas)
Crosman Forum Member
96.40.42.68

..well...

June 7 2017, 5:48 PM 

you can use a pistol mrod valve in there easily enough, but not sure how it works with bulk co2.....just have to dremmel the exhaust port a bit.....scratch that....forgot the side support screws are different....u prolly just need the valve stem, anyway. they crack and leak inside....itll leak down the barrel. otherwise, you need orings for the outside of valve....there's not much can go wrong with those alum valves -


    
This message has been edited by ranedouglas from IP address 96.40.42.68 on Jun 7, 2017 5:54 PM


 
 Respond to this message   
raneman
(Login ranedouglas)
Crosman Forum Member
96.40.42.68

...and here's a secret....

June 7 2017, 5:50 PM 

....the $2 valve pins from disco valves work very well inside the 392 valves....avg 740 fps on 8 pumps.

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member