The (new) Crosman Forum, your first and last stop for all things Crosman


Jim Gillilan's Custom 1322 Carbine

Jim Gillilan's Custom 1322 Carbine w/Custom Stock

Here's one I'm especially proud of and is modded all over, doing 12fpe at 15 pumps.
Stock is Teak from Thailand and super light weight 1322 Carbine!

  << Previous Topic | Next Topic >>Return to Index  

2200 Magnum with untapped potential, literally......

May 24 2017 at 11:58 AM
Ronald  (Login GunNut10)
Crosman Forum Member
from IP address 104.12.88.15

I picked up a 2200 Magnum receiver case off EBay. After a quick cleaning I inspected the mounting threads to ensure non were stripped. To my surprise and amazement all 3 have never been tapped. This is an unused receiver, a virgin, if you will. I have the rest of the parts to complete the receiver section including the tapered barrel shroud so this is another project for this winter. Possibly an MF-2200 Magnum, AKA "The Double Magnum". Do you feel lucky?

[linked image]


[linked image]

Ronald


    
This message has been edited by GunNut10 from IP address 104.12.88.15 on May 24, 2017 2:39 PM


 
 Respond to this message   
AuthorReply
ped
(Login --ped--)
Crosman Forum Member
90.214.18.13

barrel shroud

May 24 2017, 12:10 PM 

2 model 2200 has a straight barrel shroud well mine does as does all the screen printed ones I've seen

 
 Respond to this message   
Ronald
(Login GunNut10)
Crosman Forum Member
104.12.88.15

Re: barrel shroud

May 24 2017, 12:28 PM 

The first three digits of the SN are 86A so I think it is an 86? The tapered shroud was used from 78-83 and then they used a short tapered section that transitioned to a straight shroud. Later guns got the straight shroud same as the 2100. Either way the full tapered shroud will install on this gun and I like the looks better than the other two options.

[linked image]

[linked image]

[linked image]

Ronald


    
This message has been edited by GunNut10 from IP address 104.12.88.15 on May 24, 2017 2:06 PM


 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member