The (new) Crosman Forum, your first and last stop for all things Crosman


Jim Gillilan's Custom 1322 Carbine

Jim Gillilan's Custom 1322 Carbine w/Custom Stock

Here's one I'm especially proud of and is modded all over, doing 12fpe at 15 pumps.
Stock is Teak from Thailand and super light weight 1322 Carbine!

  << Previous Topic | Next Topic >>Return to Index  

Fabricated a crude peep for my 101

May 28 2017 at 7:00 AM
LuckyStrike   (Login lee5868)
Crosman Forum Member
from IP address 73.230.242.149

Today while in the garage I decided to fabricate a peep for my Crosman 101. It's very crude... Made out of old hose clamp and a nut. It works great though. At this time the nut is affixed with gorilla super glue. I might use JB weld or something like that. I am I open to suggestions on improvement.

[linked image]

[linked image]

[linked image]

[linked image]

[linked image]

[linked image]

 
 Respond to this message   
AuthorReply

Bio
(Login Biohazardman)
Moderator
71.236.167.69

Re: Fabricated a crude peep for my 101

May 28 2017, 11:52 AM 

Yup a rear sight is good to have and they are so often missing on the old guns. A bit more werq but a couple more ways to do things in the links below. Or you can put a small piece of metal bent at a 90 deg angle on top of your base with an aperature hole drilled through it in your choice of sizes.

http://www.network54.com/Forum/275684/thread/1177124143/My+first+peep+sight+gun

http://www.network54.com/Forum/79537/thread/1300562707/Came+across+a+Crosman+%23101



I used to have a life. But now I have the forum. I am a sick man?

[linked image]

 
 Respond to this message   
michael wolfram
(Login marflow)
Crosman Forum Member
98.247.224.182

there was a 3 part making of a 100 rear sight here is the google page

May 28 2017, 1:36 PM 


 
 Respond to this message   
michael wolfram
(Login marflow)
Crosman Forum Member
98.247.224.182

some more inside

May 28 2017, 1:43 PM 



    
This message has been edited by marflow from IP address 98.247.224.182 on May 28, 2017 4:12 PM


 
 Respond to this message   
LuckyStrike
(Login lee5868)
Crosman Forum Member
73.230.242.149

Thank you!

May 28 2017, 6:35 PM 

Thanks for the links guys. I will take some of these designs into consideration. As of now my sight will have to do until I save up enough money to possibly buy a new one.

[linked image]

 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member