<< Previous Topic | Next Topic >>Return to Index  

Now looking for 11 1/2 X 20 1/2 3 blade for 1 inch spline

July 7 2009 at 7:05 PM		   (no login)
from IP address 68.43.69.186
After talking with Steve, Tom and Dean Armstrong plus good feedback from racers on this board we have decided that the proper size would be 11 1/2 X 20 1/2 OR SOMETHING CLOSE TO IT. Thanks to all who have given their input I really appreciate it.
Mike Cashin
E/NM - 888

 
 Respond to this message   
AuthorReply
Bill
(no login)
40.0.40.10

Re: Now looking for 11 1/2 X 20 1/2 3 blade for 1 inch spline

July 8 2009, 10:02 AM 

This was a common prop for the 225's in the late '70's and mid 1980's

 
 
Current Topic - Now looking for 11 1/2 X 20 1/2 3 blade for 1 inch spline  Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  


This website is NOT RESPONSIBLE for any transaction that takes place between the buyer and seller.
I am ONLY providing this forum as a place for folks to connect and advertise that they are selling or are in need of a vintage race boat or part.
Buyers/Sellers - DO NOT use this forum to "discuss any part, before or after, the transaction" or it will be removed. Please contact each other DIRECTLY and keep those discussions off this board!
Also be aware - There are many 'scam artists' out here on the www!