<< Previous Topic | Next Topic >>Return to Index  

Chevy II/OMC/Mercruiser

September 28 2009 at 7:05 PM		   (no login)
from IP address 74.79.87.105
As some of you know I broke a valve retainer, (best titanium Crower) at Wheeling. It totaled my 153 cu. in. Chevy II breaking head, valve train, piston and block. Very UGLY!

If anyone has a couple of the 4 cylinder Chevy/GM engines up to the 180 I would like to hear from you. All I need is heads, cranks and block. Everything else is mine to add. OMC, Mercruiser, GM, Chevy etc. but heads must be the 8 port version not the siamesed product which was around for a while. Would also be interested in Super Duty Pontiac. Obviously I would prefer virgin iron that has not been ground, honed and bored.

The way this seems to be going I would like to have several in back-up. Thanks in advance.

All the best.

Dave Richardson
Big Chief A-11

 
 Respond to this message   
AuthorReply
Randy Wold
(Login RandyWold)
24.18.168.11

Chevy ll Source

September 29 2009, 7:46 PM 

Chevy II Parts
Block w/ Complete head (Stock)
Complete Race Head (Fresh Rebuild)


...call Mike 414 378 1439
msb747-AT-aol.com (replace -AT- with the @ symbol)

 
 
Current Topic - Chevy II/OMC/Mercruiser  Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  


This website is NOT RESPONSIBLE for any transaction that takes place between the buyer and seller.
I am ONLY providing this forum as a place for folks to connect and advertise that they are selling or are in need of a vintage race boat or part.
Buyers/Sellers - DO NOT use this forum to "discuss any part, before or after, the transaction" or it will be removed. Please contact each other DIRECTLY and keep those discussions off this board!
Also be aware - There are many 'scam artists' out here on the www!