Hey all I got a Raceframe with eyes currently mounted on my Fastback and im wondering if there are others out there with the same setup? Mostly looking to see if my settings are close to others....here is my settings:

Timing:
shot=7
dwell=8
open=32
load=5
close=32
close=open...check
Classic Mode
R.O.F = 13bps
Options:
ACE mounted...check
use ACE...check
CTO adjust...check
eye check max=100...check
eye ok max=100...check
default load time=30
use trigger filter=check
use LED=NO
use feeder=NO

Let me start by saying that I do not have a fast back, but I have both a full bodies racegun w/ SMC 5 way and a 05 halfblock with the racevavle.

I see some things that should help out your settings. Of course without knowing your components, specifically the ram, I can't say exactly what they should be. Each gun is different, and so yours could vary.

First, uncheck the CTO adjust. There is a small firmware glitch in it that causes problems.

Second, uncheck the open = close. It'll work better with a slight variance that I'll get into.

Third, your load either needs to be 1 to use the eyes, or set higher to match your loader (halo is 10-15, and on up from there). I'm sure that using 5 is the same thing as 1 however, but that's just being complete.

Finally, your open and load times seem VERY high. I'd think that your fastback should be at least as low as my fullbody, and they are much higher. Depending on the age of your frame, and which 5 way you have, I'd guess they should be in the nieghborhood of 18o/21c for an SMC and 14o/28c for a racevalve. That will, of course, depend on your ram and the presence or lack of QEVs on it. I'd suggest the racegun forum for the 5 min timing guide to get more precise settings.

The default factory settings on an 05 halfblock, with a CCM ram and racevalve are 6/6/14/1/28, set on classic with the eye on and the CTO off. That comes out to 20bps in the rip, and my halfblock runs it all day.

Actually I took my settings and put them on the Raceguns forum and a few helpful p/ballers helped me adjust it properly. Now my Fastback is capable of 35bps.....which is way faster than I had it before. Now I dont touch my settings at all. Only plug it in to check my battery levels.