BN - 450*300*70 FMIC with 90 deg bends welded on $175
BN – Custom PWR alloy radiator with Spal 15inch thermo to suit 1600 with FJ20 $900
BN – Datsport Throttle Kit shortened to fit FJ20 in 1600 $120
BN – Turbotech Manual boost controller $25
BN – Exedy Heavy duty cushion button clutch to suit FJ20et $500
Sway bar to suit FJ20et in 1600 + bushes and linkages $100
Shortened Tail shaft to suit FJ20 conversion $100
1600 Speedo drive to fit FJ20 $50
Old school Recaro Bucket seats (bolt into 1600) (Pair) $400

BN – Autometer gauges sportcomp
- Oil pressure $90
- Water Temp (celcius) $100
- Boost Gauge (20psi) $90
- Bracket to fit all 3 gauges $20 or $250 for everything

4 x 550cc Rx7 S4 injectors $200
BN - Bosch 044 External Fuel pump $200
Pierburg Pre pump $75

Email me on grahambikaun@hotmail.com

or Mob: 0432960574

cheers

located in WA

do the S4 RX7 injectors fit straight in??

no not that im aware of, think you need different fuel rail

Hey graham, they do go in and use the stock rail, you just need to change the plastic clips over, details here from the writeup boosted frog did -> http://www.datfusion.com/forums/index.php?showtopic=6

ahh ok.. well i was planning on getting a custom fuel rail anyway..

Now that you mention it i do recall this article

These 13b injectors are very very similar to the fj in shape

bump

throttle kit sold

Speedo drive sold

Hey Graham, I'll take the gauges off ya mate I'll call ya.

Gauges sold..

Hey Graham,

Did you have a Datspost kit in your car for the FJ... I May be intersested in the tailshaft if so cause i replaced my kit with the datsport one but need a new shaft before x mas

Let me know buddy, you can get me on my mob: 0403158798

Cheers Simon