(Premier Login Paneristiadmin) Forum Owner from IP address 72.196.192.77
The new movements: general specifications
The new P.9000 calibre is available in three versions P.9000, P.9001, P.9002 fitted with different functions, but they have in common automatic winding with a power reserve of 3 days and a special technical design which makes these movements immediately recognisable.
The new P.9000 calibre has a diameter of 13 ¾ lignes and is fitted with two barrels which ensure a power reserve of 72 hours; the single-piece rotor winds in both directions thanks to an automatic ratchet device; the balance wheel with adjustment screws, oscillates at a frequency of 4 Hz; the stop balance wheel device enables the time to be synchronised with a reference time signal.
To house these new movements, a specially-made version of the Luminor 1950 case from the Manifattura Collection has been designed, keeping the proportions of the original but holding a slightly less convex sapphire crystal which only barely protrudes from the bezel.
The calibre P.9000
The calibre P.9000, with 195 components, is used in the Luminor 1950 Marina models and the Luminor 1950 Submersible.
LUMINOR 1950 MARINA 3 DAYS AUTOMATIC 44 mm Reference: PAM00312
LUMINOR 1950 MARINA 3 DAYS AUTOMATIC 44 mm - STEEL Reference: PAM00328
LUMINOR 1950 SUBMERSIBLE 47 mm Reference: PAM00305
LUMINOR 1950 3 DAYS GMT POWER RESERVE BACK 44 mm Reference: PAM00320
LUMINOR 1950 3 DAYS GMT POWER RESERVE BACK 44 mm Reference: PAM00329