42mm Radiomir straps

I thought this may be useful for others to see.I have a PAM338 and have been trying different straps ,OEM and non OEM.The true spec for the 336,337 and 338 is an OEM 25/20.It seems that with all the radiomirs you should use a strap that is 1mm bigger than the lug size.I just picked up this Honey Gator from jdarvish (Thanks John!).It is in fact a 27/20 and I have squeezed it into the 24mm lugs of my 338.The other two straps are OEM 25/20.I had considered trimming a mm off each side of this strap and giving it a coat of edge-kote,but i'm happy with it as it is.
I believe that this strap is actually for a PAM197 or PAM198 as they also use the wire stirrup type buckle.It is interesting to note also that this is also uniformally thinner and moulds to my wristbone beautifully,and slightly better than the thicker OEM it came with.
I had been advised previously to use a 24mm strap as 25mm's were so hard to find.I tried one and didn't like it at all.It just had that little bit of wiggle that just wasn't right IMO.Hope this helps others in the same strap dilemma that i've been having.