American"Vintage Airguns" www.vintageairgun.com pic by M.Driskill

Visitors in this forum in the last 10 minutes: 5 Visitors johnny366, 4 guests

Not logged in | Login | Create Account SEARCH    Forum Index    Post Message Found a Benjamin 312. Are they much of a shooter? View Thread - Glover, Walter on Nov 5, 2009, 11:07 PM Benjamin 312 - prbeck on Nov 6, 2009, 4:10 AM About that Benji 312 "safety"..... - Larry on Nov 6, 2009, 10:35 AM You do have to wonder - Jon B. on Nov 6, 2009, 1:01 PM I my opinion - Larry on Nov 6, 2009, 8:20 PM They were deemed dagerous ... - L D on Nov 7, 2009, 8:32 PM you can't not know - johnny on Nov 8, 2009, 12:25 AM safety - johnny on Nov 7, 2009, 1:02 AM I think the safety needs to be 'set' with the hammer down on it - Glover, Walter on Nov 7, 2009, 6:50 PM Nah, just a terrible old gun... - MDriskill on Nov 6, 2009, 8:41 PM Brush gun that barks - Bill S. on Nov 6, 2009, 10:53 PM Thank you for the responses fellas! - Glover, Walter on Nov 7, 2009, 12:04 AM Looks like I'm a bit late here... - Joel on Nov 7, 2009, 1:50 AM I had one in my teens and have thought about getting another for many years... - FourRings on Nov 7, 2009, 9:58 AM   Favorite Things View Thread - Al on Nov 7, 2009, 2:18 PM Those grips are... - Matt Cooney on Nov 7, 2009, 5:49 PM One of my favorites, - Dave on Nov 7, 2009, 10:14 PM Very nice Sheridan - Al on Nov 7, 2009, 11:17 PM check out the attached posts - Dave on Nov 7, 2009, 11:24 PM   WOW !!!! Vintage Webley eye candy alert !!!! ! View Thread - leonardj on Oct 30, 2009, 4:52 PM OMG..............to beautiful for words - TStray on Oct 30, 2009, 5:40 PM Now I will leave that carved up one to Tom and send my pounds sterling off to Mick... - Gaines Thomas Blackwell on Oct 30, 2009, 5:56 PM Speechless. - Matthew Noe on Oct 30, 2009, 6:46 PM You have got to be kidding. That's as nice as a 4 barrel purdy kit. - kevin lentz on Oct 30, 2009, 11:43 PM The word "unbelievable" is over-used... - MDriskill on Oct 31, 2009, 9:46 AM Will it ever end! - Don Raker on Nov 7, 2009, 10:12 PM   FWB 65 MK II value? View Thread - Bob in WV on Nov 7, 2009, 6:29 PM saw a few in Roanoke - Don Raker on Nov 7, 2009, 9:21 PM Thanks Don! - Bob in WV on Nov 7, 2009, 10:08 PM   BSA No.8 Aperture Sight View Thread - Andy on Nov 6, 2009, 9:31 AM Detent for the adjustable aperture - Nick Carter on Nov 6, 2009, 10:51 AM Sight detent - MDriskill on Nov 6, 2009, 9:01 PM Yeah, it's fascinating... - Nick Carter on Nov 7, 2009, 11:38 AM What was it intended for? - RedFeather on Nov 6, 2009, 5:19 PM Re: What was it intended for? - Andy on Nov 7, 2009, 5:18 AM Rare to see one in that condition. - Garvin on Nov 7, 2009, 10:53 AM I thought that might fit a Martini shank. - RedFeather on Nov 7, 2009, 6:29 PM   Feinwerkbau 150 Help needed View Thread - Jon F. on Oct 26, 2009, 7:55 PM Jon, wish I could help but ..... - Gaines Thomas Blackwell on Oct 28, 2009, 4:58 PM Had the exact same problem with a 150 - TStray on Oct 28, 2009, 5:07 PM Try David Slade - Matt Cooney on Oct 28, 2009, 11:15 PM And the winner is... - Jon F. on Oct 31, 2009, 5:47 PM Way to go Jon - TStray on Oct 31, 2009, 8:31 PM A little background info... - Jon F. on Oct 31, 2009, 7:54 PM Jon, Very nice report and happy to hear of your good outcome. - Gaines Thomas Blackwell on Oct 31, 2009, 8:22 PM Encouragement.... - Jon F. on Nov 1, 2009, 12:11 PM a nightmare - Don Raker on Nov 7, 2009, 2:54 PM I would consider... - Jon F. on Nov 7, 2009, 6:05 PM FWB 150 Secret - Jim E on Nov 7, 2009, 3:37 PM   HW 50 S View Thread - MDriskill on Nov 6, 2009, 10:25 PM Alright Mike you can stop now. - kevin lentz on Nov 6, 2009, 11:41 PM Cool! - MDriskill on Nov 7, 2009, 9:48 AM Thanks Mike. I loaned my tuned R-7 to a friend that's - kevin lentz on Nov 7, 2009, 4:56 PM MDriskill - Joel on Nov 7, 2009, 1:54 AM   I'm going to disassemble my Wischo 55. So far I have the View Thread - Mike in NC on Nov 6, 2009, 11:24 AM I use simple green - Jim in PGH on Nov 6, 2009, 2:23 PM Thanks Jim I switched to rubbing alcohol. I was scared the carb - Mike in NC on Nov 6, 2009, 2:37 PM It's apart and completely nasty. Piston seal once cleaned looks like it - Mike in NC on Nov 6, 2009, 2:39 PM Ready to put trigger housing back together. What kind of light oil should I lube it with? - Mike in NC on Nov 6, 2009, 3:13 PM Something very light, and keep Moly out of triggers - Jim in PGH on Nov 6, 2009, 3:43 PM Hey Mike, did you pick that gun up at Roanoke? - Jim in PGH on Nov 6, 2009, 4:18 PM Speaking out of turn... - MDriskill on Nov 6, 2009, 4:28 PM Thanks Mike D, good to know. - Jim in PGH on Nov 6, 2009, 4:32 PM Mike, your hillbilly roots are showing, a brief Ebonics update.... - Gaines Blackwell on Nov 7, 2009, 10:19 AM   Mike Driskill Honored Airgunner Roanoke 2009, revised View Thread - Quackenbush on Oct 26, 2009, 11:17 AM Dennis Quackenbush - Quackenbush on Oct 26, 2009, 11:17 AM Vlad Berchanskiy - Vlad Berchanskiy on Oct 26, 2009, 10:14 PM Matthew Noe - Matthew Noe on Oct 26, 2009, 11:34 AM Michael Scarboro - Mike in NC on Oct 26, 2009, 11:51 AM Don Raker - Don Raker on Oct 26, 2009, 11:52 AM Gaines Blackwell - Gaines Thomas Blackwell on Oct 26, 2009, 12:04 PM Jim Edmondson - Jim E on Oct 26, 2009, 12:19 PM Dave Barchent - Dave on Oct 26, 2009, 12:33 PM Bud Bradford - Bradford on Oct 26, 2009, 12:46 PM Beth Ford - Beth Ford on Oct 26, 2009, 12:50 PM Frank Korn - Frakor on Oct 26, 2009, 1:17 PM Jim Grossman - Jim in PGH on Oct 26, 2009, 1:46 PM Ken Walker - kennyboy on Oct 26, 2009, 2:08 PM Trevor Adams - Trevor on Oct 26, 2009, 6:25 PM Arnold Smith - Arnold Smith on Oct 26, 2009, 2:08 PM Eric Stoffregen - reric on Oct 26, 2009, 2:25 PM August Przybilla - RedFeather on Oct 26, 2009, 2:30 PM Anderson Kurt Huffman - Huffman on Oct 26, 2009, 3:15 PM lindsey crane - lindsey crane on Oct 26, 2009, 3:17 PM Bud Brinkmeyer - BUD on Oct 26, 2009, 4:33 PM Robert McBrien - Robert McBrien on Oct 26, 2009, 4:46 PM Al Bartolotta - alb77 on Oct 26, 2009, 5:29 PM Tom Strayhorn - TStray on Oct 26, 2009, 5:44 PM Leonard Joe - leonardj on Oct 26, 2009, 5:54 PM Jack Sowell - Jack Sowell on Oct 26, 2009, 6:31 PM Bob in WV - Bob in WV on Oct 26, 2009, 6:31 PM Jonathan S. Ferreira - Jon F. on Oct 26, 2009, 6:53 PM Joe in WV - Joe in WV on Oct 26, 2009, 7:23 PM Al Sterner - Al on Oct 26, 2009, 8:46 PM clive tollady - clive tollady on Oct 26, 2009, 9:43 PM Timjohnston - tim johnston on Oct 26, 2009, 10:09 PM Mike Congrat's - Paul on Oct 26, 2009, 10:10 PM A well deserved award. - Russell Best on Oct 26, 2009, 10:12 PM Please conform to title protocol... - Quackenbush on Oct 27, 2009, 5:17 PM Matt Cooney - Matt Cooney on Oct 26, 2009, 10:18 PM Chuck Jordan - Chuck Jordan on Oct 26, 2009, 10:19 PM Fleming E. Jones, Jr - Fleming on Oct 26, 2009, 10:21 PM Matt Cooney - Matt Cooney on Oct 26, 2009, 10:24 PM kevin lentz - kevin lentz on Oct 26, 2009, 11:03 PM Dave Ho - dave98k on Oct 26, 2009, 11:24 PM Todd Lando - TC on Oct 26, 2009, 11:28 PM Malachy Hackett - M'hackett on Oct 27, 2009, 12:28 AM Matthew Saenz - matt saenz on Oct 27, 2009, 1:21 AM Grant Stace. - Grant on Oct 27, 2009, 4:00 AM Rob Prosio - airbuff on Oct 27, 2009, 7:51 AM Jonathan Williams - Jonathan Williams on Oct 27, 2009, 8:15 AM Gregory McMahon - Gregory McMahon on Oct 27, 2009, 8:31 AM Paul Watts - Paul Watts on Oct 27, 2009, 8:39 AM David Enoch - David Enoch on Oct 27, 2009, 8:49 AM BBGun Bob - Robert Schlund on Oct 27, 2009, 8:55 AM Mike Van Winkle - Mike on Oct 27, 2009, 2:29 PM Jock Elliott - Jock Elliott on Oct 27, 2009, 2:55 PM Edward J.Williams - ejwills on Oct 27, 2009, 3:13 PM Dennis Reardon - Dennis on Oct 27, 2009, 3:21 PM Randy Mitchell - Randy Mitchell on Oct 27, 2009, 3:39 PM David Kirk - Capk on Oct 27, 2009, 7:37 PM Hollis B. Woods - Heywood on Oct 27, 2009, 9:16 PM John M. Ulrich - John Ulrich on Oct 28, 2009, 9:25 AM Michael Meijer - Michael Meijer on Oct 28, 2009, 1:10 PM Charles Ward - Charles Ward on Oct 28, 2009, 5:34 PM Lance Bernard - Lance Bernard on Oct 28, 2009, 8:24 PM Bill Meister - BlllinCCMo on Oct 29, 2009, 9:22 PM Larry Hannusch - Larry on Oct 30, 2009, 10:13 AM Jon Bart - JB - San Diego on Nov 3, 2009, 9:27 AM Theodore L. Summers - Theodore L. Summers on Nov 7, 2009, 9:14 AM Dave Mail - Dave Mail on Nov 7, 2009, 10:09 AM   Pneumatic pumper theoretical question View Thread - Larry on Nov 3, 2009, 6:35 PM Re: Pneumatic pumper theoretical question - dave on Nov 3, 2009, 7:00 PM Re: Pneumatic pumper theoretical question - Larry on Nov 3, 2009, 8:08 PM ok, soo - dave on Nov 3, 2009, 10:36 PM Actually I was thinking the opposite - Larry on Nov 4, 2009, 12:33 AM So smaller is better....... - Fred on Nov 4, 2009, 11:41 PM better to a point - dave on Nov 5, 2009, 5:49 PM higher pressure from the same number of pumps doesn't always yield more velocity - scot laughlin on Nov 7, 2009, 3:15 AM believe it or not - johnny on Nov 5, 2009, 1:48 AM Yup that's exactly my contention - Larry on Nov 5, 2009, 10:02 AM totally missed the point here - dave on Nov 5, 2009, 5:42 PM Well, I've got some results - Larry on Nov 5, 2009, 8:45 PM great work - Joel on Nov 5, 2009, 11:05 PM Good question..... - Larry on Nov 5, 2009, 11:58 PM   Anyone that uses AVG Free anti-virus - problem? View Thread - leonardj on Nov 6, 2009, 4:49 PM they suggest you "upgrade" - Huffman on Nov 6, 2009, 5:16 PM work around - Ron on Nov 6, 2009, 7:46 PM AVG free - Joel on Nov 7, 2009, 2:04 AM   Benjamin #362 convert View Thread - Anthony R on Nov 6, 2009, 8:11 AM Re: Benjamin #362 convert - Jon B. on Nov 6, 2009, 1:02 PM There should - Anthony R on Nov 6, 2009, 1:22 PM   LG 55 Butt Pad !! View Thread - Paul on Oct 31, 2009, 5:36 PM Paul, LG 55 butt pads are hard to come by and worst.... - Gaines Thomas Blackwell on Oct 31, 2009, 8:20 PM Since we're talking about German butts again... - Matt on Nov 5, 2009, 7:27 AM   Crosman 140 - Help with restoration View Thread - John on Nov 3, 2009, 4:48 AM Here's a link to Crosman - Dave on Nov 3, 2009, 10:41 AM also try Nick Carters blog - Jon B. on Nov 3, 2009, 12:14 PM those are minor parts - johnny on Nov 5, 2009, 1:55 AM Re: those are minor parts - John on Nov 5, 2009, 6:01 AM   A few more that followed me home (pics).... View Thread - Brian in Pa on Nov 2, 2009, 12:11 PM There 's no place like home .. for beauties like those - Jim Edmondson on Nov 2, 2009, 1:25 PM Beautiful airguns, but something doesn't look quite right..... - leonardj on Nov 2, 2009, 1:45 PM Interesting info.... - Brian in Pa on Nov 2, 2009, 1:59 PM Long-barrelled Tracker - MDriskill on Nov 2, 2009, 7:19 PM Learn something new every day...... - leonardj on Nov 2, 2009, 7:54 PM Beauties all! - MDriskill on Nov 2, 2009, 7:28 PM Tempest... - Brian in Pa on Nov 2, 2009, 8:57 PM Glad the 335 found a good home Brian. - Al on Nov 2, 2009, 8:38 PM Thanks again Al... - Brian in Pa on Nov 2, 2009, 9:00 PM An interesting 335 detail - MDriskill on Nov 2, 2009, 9:25 PM Pretty Much...but Beeman Silver Arrows begin to fade pretty quickly... - Heywood on Nov 3, 2009, 1:14 AM May I Ask... - Heywood on Nov 3, 2009, 1:20 AM Purchased from... - Brian in Pa on Nov 3, 2009, 8:32 AM J.M. Anschutz 335 spring... - Heywood on Nov 4, 2009, 3:41 AM   Airgun eMatches with PRIZES View Thread - Airgun Shooter on Nov 3, 2009, 5:16 PM   vintage ammo needed mc22 healthways plainsman View Thread - Huffman on Nov 2, 2009, 9:37 AM Haven't seen any in awhile - jbjenkins on Nov 2, 2009, 12:23 PM   Question-Crosman mod.107 Town& Country.? View Thread - ejwills on Nov 1, 2009, 1:40 PM Yup, it's a 107... - Don Raitzer on Nov 1, 2009, 3:40 PM Thanks for the reply. - ejwills on Nov 2, 2009, 11:20 AM   Predom Disassembly Instructions? View Thread - VLS95 on Nov 1, 2009, 6:48 PM   I was messing around with sights today View Thread - Jim in PGH on Oct 31, 2009, 8:59 PM The Commie Springer Whisperer strikes again! - MDriskill on Nov 1, 2009, 4:45 PM The rounded fork - Jim in PGH on Nov 1, 2009, 6:17 PM   Two from the Roanoke show (lots of pics)... View Thread - Brian in Pa on Nov 1, 2009, 12:25 PM Great looking G46 - RedFeather on Nov 1, 2009, 12:49 PM Thanks RF... - Brian in Pa on Nov 1, 2009, 1:12 PM G46 - MDriskill on Nov 1, 2009, 4:40 PM I believe there is one called the G36, as well - RedFeather on Nov 1, 2009, 5:32 PM Thank you Mike... - Brian in Pa on Nov 1, 2009, 5:36 PM   Anyone have trigger parts for RWS 75? View Thread - Ron on Nov 1, 2009, 3:35 PM   Could Have Been Woe, But Saved By Joe View Thread - Mike on Oct 29, 2009, 9:06 AM Thank you for the great review....... - leonardj on Oct 29, 2009, 8:15 PM Mike, What a glowing tribute to this wonderful forum and to - kevin lentz on Oct 29, 2009, 9:35 PM Recognition. - Michael Meijer on Nov 1, 2009, 9:27 AM Thanks Kevin and Michael - Mike on Nov 1, 2009, 1:57 PM   crosman 140 View Thread - koonce on Sep 21, 2009, 7:44 PM Adjust pump piston linkage - Bill S. on Sep 21, 2009, 10:07 PM crosman 140 - koonce on Sep 21, 2009, 11:19 PM Overtoggle - DT Fletcher on Sep 22, 2009, 2:34 AM crosman 140 - koonce on Sep 22, 2009, 7:30 AM Re: Adjust pump piston linkage - Larry on Nov 1, 2009, 1:01 AM Tension - Bill S. on Nov 1, 2009, 10:28 AM   So what’s so good about the Vintage Feinwerkbau Single Stroke Pneumatic Air Rifles? View Thread - Jim Edmondson on Oct 30, 2009, 9:10 PM I would imagine the resale value, and profit margin... - Heywood on Oct 30, 2009, 9:36 PM Gee Mark why are you so troubled as Gaines/Driskill/Strayhorn all - Jim E on Oct 30, 2009, 9:40 PM I have always had a fondness for the 600-601 as I like the simplicity of .... - Gaines Thomas Blackwell on Oct 30, 2009, 10:07 PM FWB ssp - Jack Sowell on Nov 1, 2009, 9:37 AM   The Schimel upgrades View Thread - David Schimel on Oct 31, 2009, 8:19 AM   New Schimel website View Thread - Don Raker on Sep 28, 2009, 1:00 PM Interesting - jbjenkins on Sep 28, 2009, 3:36 PM Orville sons - David Schimel on Oct 10, 2009, 9:04 AM Contact DT Fletcher - jbjenkins on Oct 10, 2009, 5:09 PM Orville son - David Schimel on Oct 10, 2009, 5:43 PM i'll send you what I have,, - jbjenkins on Oct 10, 2009, 8:53 PM Schimel - DT Fletcher on Oct 10, 2009, 7:39 PM Schimel stuff - DT Fletcher on Oct 10, 2009, 8:24 PM Dean you're holding out on me - jbjenkins on Oct 10, 2009, 8:51 PM Schimel stuff - DT Fletcher on Oct 12, 2009, 6:01 PM Schimel Gun and History - Jon on Oct 13, 2009, 3:09 AM rifle - Trevor on Oct 23, 2009, 5:44 AM Rifle - David Schimel on Oct 23, 2009, 4:47 PM Schimel history - David Schimel on Oct 12, 2009, 5:01 PM Any chance of the whole gun being remade? - Bob in WV on Oct 12, 2009, 5:16 PM Re-manufacture the Schimel - David Schimel on Oct 13, 2009, 5:57 PM Schimel Progress - David Schimel on Oct 31, 2009, 8:11 AM Thank You - David Schimel on Oct 16, 2009, 8:49 PM Schimel Hand Grips - David Schimel on Oct 22, 2009, 8:12 PM Hand Grips are available - David Schimel on Oct 31, 2009, 8:15 AM   Can It Be Called a Vintage Airgun? View Thread - Matt Cooney on Oct 30, 2009, 8:20 PM Very Well Made ! - Heywood on Oct 30, 2009, 8:34 PM Here's the skinny... - Matt Cooney on Oct 30, 2009, 8:44 PM I reckon you started at the Top...That's a Class Act - Heywood on Oct 30, 2009, 9:22 PM I have a Maccari trigger that the seller included - Matt Cooney on Oct 30, 2009, 10:35 PM Deleted - Matt Cooney on Oct 30, 2009, 10:37 PM May I ask if those checkerings are done by hand or by machine? - Tom on Oct 30, 2009, 8:47 PM That's Definitely Hand Checkered... - Heywood on Oct 30, 2009, 9:30 PM Yep, hand checkering confirmed - Matt Cooney on Oct 30, 2009, 10:32 PM   Testing the Waters View Thread - Jim E on Oct 30, 2009, 2:44 PM If only... - Joel on Oct 30, 2009, 4:12 PM   Mendoza peep View Thread - Joel on Oct 28, 2009, 12:11 PM Joel, I do not have a Mendoza peep nor a manual but..... - Gaines Thomas Blackwell on Oct 28, 2009, 1:18 PM Peep sight - Joel on Oct 28, 2009, 4:55 PM Aperture sight - MDriskill on Oct 28, 2009, 6:57 PM MDriskill - Joel on Oct 29, 2009, 1:48 AM Lemme get this straight... - MDriskill on Oct 29, 2009, 5:18 PM HAH - Joel on Oct 30, 2009, 4:07 PM   Webley Mk.3 Stock Inserts View Thread - David on Sep 20, 2009, 9:05 AM Hi David, I think that was my friend... - Brian in Pa on Sep 20, 2009, 10:04 AM Cool! - MDriskill on Sep 20, 2009, 1:24 PM Re: Cool! - David on Sep 20, 2009, 1:55 PM Insert material - MDriskill on Sep 20, 2009, 2:05 PM Re: Insert material - David on Sep 20, 2009, 5:34 PM Re: Insert material - David on Sep 25, 2009, 11:29 AM Re: Webley Mk.3 Stock Inserts - David on Sep 24, 2009, 10:03 AM Re: Webley Mk.3 Stock Inserts - David on Oct 30, 2009, 1:01 PM   Found this one waiting for me when I returned from Roanoke View Thread - TStray on Oct 28, 2009, 10:15 PM Tom, that's a beauty! - Matthew Noe on Oct 28, 2009, 10:36 PM Thanks Matt - TStray on Oct 28, 2009, 10:39 PM Mighty Nice, Tom - Matt Cooney on Oct 28, 2009, 11:17 PM Great find Tom! - FourRings on Oct 29, 2009, 7:06 PM Oh my... - MDriskill on Oct 29, 2009, 7:35 PM Fine looking rifle - alb77 on Oct 29, 2009, 10:35 PM Sure is purdy! - Chuck Jordan on Oct 30, 2009, 6:48 AM   Daisy Mod 25 questions... View Thread - Victor3 on Oct 3, 2009, 11:01 PM Age - Dave on Oct 4, 2009, 8:51 AM Vintage Daisy No 25, date of manufacture - Will Clifford on Oct 5, 2009, 2:32 PM Thanks guys... n/t - Victor3 on Oct 7, 2009, 2:51 AM daisy 25 - johnny on Oct 12, 2009, 12:01 AM daisy 25 - johnny on Oct 12, 2009, 12:08 AM Your On !!! - Grant on Oct 12, 2009, 2:25 AM Thanks Johnny. - Victor3 on Oct 20, 2009, 6:39 AM instructions for teardown - johnny on Oct 30, 2009, 1:36 AM   Leonard Joe View Thread - joe.l on Oct 29, 2009, 2:22 PM   Hammerli Master Problem View Thread - Craig Evans on Oct 29, 2009, 7:53 AM Hammerli Service - Robert McBrien on Oct 29, 2009, 9:39 AM Thanks for contact - Craig Evans on Oct 29, 2009, 1:47 PM Rudy is indeed a great guy - TStray on Oct 29, 2009, 1:49 PM Leaving the gun charged for 3 weeks - Al on Oct 29, 2009, 10:22 AM   Benjamin #362 View Thread - Anthony R on Oct 26, 2009, 11:23 AM Parts Diagram - John Jones on Oct 26, 2009, 3:16 PM Thanks..Couldn't - Anthony R on Oct 27, 2009, 7:37 AM What I would do.. - DT Fletcher on Oct 27, 2009, 5:41 PM Nothing to Steroid - Anthony R on Oct 28, 2009, 8:30 PM Wasn't looking close enough - DT Fletcher on Oct 29, 2009, 1:23 AM   Lots of pics from Roanoke 09 View Thread - TStray on Oct 26, 2009, 5:42 PM Just like being there... - Mike on Oct 26, 2009, 5:54 PM Thanks Tom - Dave on Oct 26, 2009, 6:05 PM Thanks! - Trevor on Oct 26, 2009, 6:22 PM Sad news - Trevor on Oct 26, 2009, 6:27 PM Tom these are great! - MDriskill on Oct 26, 2009, 9:30 PM Great Pic's ! - Paul on Oct 26, 2009, 10:19 PM Thanks for taking us to the Show nt - reric on Oct 26, 2009, 11:08 PM Looking for Mr. Bloemendaal - Mike on Oct 27, 2009, 2:46 PM Thank you very much Tom! - Vlad Berchanskiy on Oct 27, 2009, 7:28 PM Glad everyone enjoyed the pics - TStray on Oct 28, 2009, 10:01 AM Thanks - ejwills on Oct 28, 2009, 4:14 PM   Crosman 120 exhaust stem View Thread - Larry on Oct 22, 2009, 12:14 AM Valve nut - DT Fletcher on Oct 23, 2009, 2:42 AM 105-8 - DT Fletcher on Oct 23, 2009, 2:48 AM Re: 105-8 - Larry on Oct 23, 2009, 11:31 PM material - DT Fletcher on Oct 24, 2009, 2:09 PM Dean, the "STEM" is the shaft - L D on Oct 24, 2009, 9:06 PM Exhaust Valve Assembly - DT Fletcher on Oct 27, 2009, 5:09 PM Re: material - Larry on Oct 24, 2009, 9:48 PM maybe the barrel isnt lining up, - L D on Oct 25, 2009, 12:11 AM It's possible - Larry on Oct 25, 2009, 1:09 PM A possible test - DT Fletcher on Oct 27, 2009, 5:36 PM Re: A possible test - Larry on Oct 28, 2009, 12:06 AM   Need Help Repairing LP3M View Thread - Neil T. Nakamura on Oct 26, 2009, 3:37 PM LP3 repair... - Don Raitzer on Oct 26, 2009, 8:24 PM Claims not to work on this model - Neil T Nakamura on Oct 27, 2009, 5:49 PM anotther option... - Don Raitzer on Oct 27, 2009, 9:56 PM Randy Bimrose did mine - Matt Cooney on Oct 26, 2009, 11:06 PM What was the turnaround time? - Neil T Nakamura on Oct 27, 2009, 3:31 PM Hard man to reach - Neil T Nakamura on Oct 27, 2009, 3:57 PM Try this address: - Matt Cooney on Oct 27, 2009, 10:25 PM Is leonardj Available? - Neil T Nakamura on Oct 27, 2009, 7:15 PM E-mail sent. <nt> - leonardj on Oct 27, 2009, 10:51 PM Randy Bimrose - Vlad Berchanskiy on Oct 27, 2009, 7:29 PM   Picture of Mike receiving Honored Airgunner Award View Thread - Quackenbush on Oct 27, 2009, 9:38 AM Pic of Mike with award. - Dave on Oct 27, 2009, 6:08 PM Congratulations Mike!!!!!! - Vlad Berchanskiy on Oct 27, 2009, 7:30 PM   Roanoke award View Thread - MDriskill on Oct 26, 2009, 9:22 PM Attach the names from the forum.... - Quackenbush on Oct 26, 2009, 9:59 PM David Kirk - Capk on Oct 27, 2009, 7:30 PM   WTB: S&W79G parts View Thread - AA Skiff on Oct 27, 2009, 12:12 PM   Sad News View Thread - Trevor on Oct 26, 2009, 6:30 PM I know I will miss him - Glen on Oct 26, 2009, 8:44 PM It Is. - Grant on Oct 27, 2009, 4:15 AM   Edit of names...on below post for Mike D View Thread - Dave on Oct 26, 2009, 11:43 PM   300T View Thread - Matt on Oct 25, 2009, 7:18 PM Very nice example, cleaned up quite well....GB - Gaines Thomas Blackwell on Oct 25, 2009, 7:20 PM What are your steps? - Glen on Oct 25, 2009, 8:15 PM Refinish - Matt on Oct 25, 2009, 9:29 PM The 150-300S FWB's were sprayed with nitrocellulose lacquer - Gaines Thomas Blackwell on Oct 25, 2009, 10:09 PM Jim E. has explained in detail - Matt Cooney on Oct 26, 2009, 11:12 PM   Got leather breech seal for wischo kg. Should I oil it with a silicon oil View Thread - Mike in NC on Oct 26, 2009, 10:44 AM Breech seal - MDriskill on Oct 26, 2009, 9:54 PM Ring the (empty) breech cutout with oil - Chuck Jordan on Oct 26, 2009, 10:31 PM   Hello from Roanoke ! View Thread - Chuck Jordan on Oct 24, 2009, 10:16 AM It appears that - reric on Oct 24, 2009, 10:49 AM Someone brought in boxes of HW55T's and was selling them for $1.50 - Chuck Jordan on Oct 24, 2009, 11:35 AM How's that for live on the scene reporting.. - Dave on Oct 24, 2009, 12:36 PM Not a frown among 'em! - Matthew Noe on Oct 24, 2009, 12:41 PM Hi Chuck... - MDriskill on Oct 25, 2009, 7:12 PM Taking pics was fun, meeting you and others was worth the trip - Chuck Jordan on Oct 26, 2009, 7:52 AM Eric, I think that is a bunch of precision airgun owners... - Gaines Thomas Blackwell on Oct 25, 2009, 7:23 PM Re: Hello from Roanoke ! - Vlad Berchanskiy on Oct 25, 2009, 8:51 PM Roanoke - Jack Sowell on Oct 25, 2009, 9:05 PM Thank you Jack! - Vlad Berchanskiy on Oct 26, 2009, 10:09 PM   Winchester Target 333 ARGHHHHHHHH............ View Thread - Kyle on Oct 9, 2009, 11:25 PM They Look Like Real Fresh Breakages?? - Grant. on Oct 10, 2009, 4:33 AM I assume that.......... - Kyle on Oct 10, 2009, 11:21 AM Shoulder......Que ??? - Heywood on Oct 10, 2009, 6:17 PM Heywood I am not ...... - Kyle on Oct 10, 2009, 6:21 PM Your word...not mine - Heywood on Oct 10, 2009, 6:58 PM Dooughhhh my bad Heywood........... - Kyle on Oct 11, 2009, 1:39 AM If that had been my gun - RedFeather on Oct 10, 2009, 6:41 PM Yup... ! - Heywood on Oct 10, 2009, 7:01 PM Bought it after it was broken so I................. - Kyle on Oct 11, 2009, 1:43 AM Might Be A Long Shot?? - Grant. on Oct 10, 2009, 6:58 PM It is "Always" a longshot when dealing with Diana Giss parts - Heywood on Oct 10, 2009, 7:19 PM If you can't find a beater - Garvin on Oct 10, 2009, 8:24 PM Might want to call ahead on that - RedFeather on Oct 10, 2009, 9:31 PM If it was me... - Nick Carter on Oct 10, 2009, 11:00 PM Way over my head brother........... - Kyle on Oct 11, 2009, 1:36 AM If you get the parts... - Nick Carter on Oct 11, 2009, 11:59 AM Re Parts. - Grant on Oct 11, 2009, 3:50 PM Possibly - Nick Carter on Oct 11, 2009, 7:57 PM RE: The amount of money people will "Try" and charge you - Heywood on Oct 11, 2009, 8:27 PM Goofy foolishness, I know -- - Stepar on Oct 13, 2009, 10:47 PM Parts for Winchester 333 - Jon F. on Oct 26, 2009, 7:21 PM   Hard manual labour on a Juvenile ............ View Thread - Frakor on Oct 26, 2009, 4:30 PM Well done..... - leonardj on Oct 26, 2009, 6:01 PM   WTB Mint FWB 65 View Thread - Neil T. Nakamura on Oct 26, 2009, 3:42 PM      1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50    Next >>