Return to Start  

150

September 29 2017 at 6:36 AM
MDriskill  (Login MDriskill)
Group #188948


Response to Advice about FWB 150

 

I assume you're referring to the little "shelf" piece at the back, which is a piece of flat metal mounted in a slot in the solid metal rear action cap. There should be a little space between it and the wood, though usually you see slightly less than this. Might not be the OEM stock, or may just need a screw tightened, who knows, but it doesn't look too scary.

It does not look to be bent or misplaced with regard to the action, which from this snippet looks to be well cared-for.

I'd never noticed until just now, that on the later 300 and 300S models, there is a groove in the stock under this piece. When looking at the gun from the side, you are less aware of the space beneath it, if that makes sense.

Beware that some parts for the 150 are becoming pretty scarce. You definitely want to check it out fully if it is to be a long-term investment.

 
 Respond to this message   
Responses

Find more forums on Air GunsCreate your own forum at Network54
 Copyright © 1999-2017 Network54. All rights reserved.   Terms of Use   Privacy Statement  
This forum dedicated to all that enjoy collecting and restoring airguns. Have fun. Dave