The tank would....January 25 2012 at 5:40 AM
|Cpt. S. Sosebee, USA (Ret) (no login)|
from IP address 184.108.40.206
Response to Help - I need info on a thrown track.
immediately slew to the side that lost the track. (in your case to the right) How sharp the slew would depend on the speed of travel and/or if it were turning at the time of the track break (turning puts a lot of stress on the tracks and is probably the leading non-combat cause of a thrown/broken track).
With a front sprocketed tank, the sprocket would spin faster than the other track, literally pulling the track and throwing it out in front of the tank. The speed of travel at the time of the break would also determine the sharpness of the slew. The higher the speed the more unlikely the tank would be able to stop before the track was pulled through the sprocket and thrown out in front of the tank. The sprockets also put a great deal of stress on tracks, and, for example, if the track broke at the sprocket the first road-wheel would "dig in" to the ground and slew the tank to that side. If the track broke underneath the road wheels then the tank would act normally until the track tension is lost at the rear (idler) of the tank. When the tension is lost, the sprocket spins faster, pulling the loose track through and throwing it in front of the tank.
With a rear sprocketed tank the tracks would act similarly to the above, but the loss of tension would be at a different location.
As to the track behind the tank it would most likely be straight unless it had just made a turn when the track broke.
Posting or replying to messages on Tank Talk requires visitors to register:
- First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
- Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.
Your user name and password will give you full posting privileges to all of HyperScale Forums.
Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server. Off-topic posts will also be removed from the server. Repeat offenders will be blocked from accessing all of HyperScale's Forums.
In addition, "Tank Talk" is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.
Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.