(Login yagerj) HyperScale Forums from IP address 220.127.116.11
I primarily build aircraft but recently bought the Trumpeter 1/35 Soviet B-4 M1931 203mm Howitzer kit for a diversion. My armor builds have been few and very far between so I am just a beginner in some respect. This kit has track treads made using individual links and that's where I'm stumped as to the best way to build the tracks. The links do not snap together - they glue together. What is the best way to build the treads and end up with a convincing look to the treads? I'm assuming the individual links will require being painted while still attached to their sprue. The instructions show 38 links per tread. ANY help would be MOST appreciated. This is a very detailed and unusual looking piece of artillery with its tracks instead of the usual wheels, a very good fitting model and too costly to end up on the shelf of doom because I cannot get the tracks done in a realistic manner. Thanks for any advice.
Your user name and password will give you full posting privileges to all of HyperScale Forums.
Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server. Off-topic posts will also be removed from the server. Repeat offenders will be blocked from accessing all of HyperScale's Forums.
In addition, "Tank Talk" is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.
Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.