<< Previous Topic | Next Topic >>Return to Index  

Scalecal help with uses.

July 4 2009 at 3:52 PM		   (Login sonny64)
HyperScale Forums
from IP address 4.238.0.61
Using the hyperscale free scale calculator, I wanted to uses the measurements of a 1/35 scale tank as a referance for a 1/15. The measurement on the 1/35 is .45" when inserted in formula gives me 1.05" for the 1/15. But this is over 3/4 of the area that I am working with. Where on the 1/35 looks about 1/2.

Second thing that I measured was the armor plate bolted to the top front. On the 1/35 scale the widest width is 1.17" convert to 1/15 scale is 2.73 which is wider than the top of the tank at that area.

What am I doing wrong or is the Glencoe 1/15 M41 so out of scale to the measurement of the AFV 1/35 kit?

 
 Respond to this message   
Current Topic - Scalecal help with uses.
  << Previous Topic | Next Topic >>Return to Index  

Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server. Off-topic posts will also be removed from the server. Repeat offenders will be blocked from accessing all of HyperScale's Forums.

In addition, "Tank Talk" is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.