<< Previous Topic | Next Topic >>Return to Index  

1/72 Stuarts?

September 14 2009 at 8:43 PM		   (Login Gluehuffer)
HyperScale Forums
from IP address 76.68.118.120
My original post seems to have disappeared but I was wondering if, other than the Hasegawa kit, there are any other 1/72 M3/5 Stuarts available, variant isn't important.

 
 Respond to this message   
AuthorReply

(Login daleslight.....dogsdad)
HyperScale Forums
123.211.193.201

Yes Mike, two more in injection molding...........

September 15 2009, 5:10 AM 

There is the Matchbox kit. 1/76 scale but a very nice Stuart.
Next is from memory the Mirage series of the Stuart family, 1/72 and all very nice.
There are also some excellent resin Stuarts from Cromwell and Millicast. I have seen these and they are by far the best.

HTH.
Dale.....Queensland.

 
 Respond to this message   

(no login)
76.68.118.120

Re: Yes Mike, two more in injection molding...........

September 15 2009, 7:20 AM 

Thanks Dale, for some reason every time I did a search I only got hits of the Hasegawa kit.

 
 Respond to this message   

(Login djnick66)
HyperScale Forums
71.100.204.84

Name

September 15 2009, 8:34 AM 

If you search Stuart I think the Hasegawa kit is the only kit with that on the box... but if you search M3, Honey, M3A1 etc you will find the other kits.

The Mirage kits are the best of the lot.


 
 Respond to this message   
Current Topic - 1/72 Stuarts?
  << Previous Topic | Next Topic >>Return to Index  

Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server. Off-topic posts will also be removed from the server. Repeat offenders will be blocked from accessing all of HyperScale's Forums.

In addition, "Tank Talk" is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.