Trumpeter Sd.Kfz. 7 chassisJuly 1 2012 at 7:52 AM
|david nickels (Login djnick66)|
from IP address 22.214.171.124
Not a bad kit; the Sd.Kfz. 7/1. The chassis has some minor issues with wheel spacing, though.
Trumpeter would have you add the gear shift levers, etc. to the top of the gear box. While accurate, they will just get broken off during construction so add them later before you fit the armored cab.
|Roy A. Schlicht|
Couple of things,
|July 2 2012, 8:14 AM |
I think the wheel spacing issue is due to the frame being too long and as for the gear levers, I too had to leave them off as there is no way you can put the cab floor on with them attached (I built the 7 Late). Also Trumpeter flubbed up the front fenders on the original release and have never fixed them on any subsequent release although the problem is well documented. Your off to a good start.
OMG! Somebody building something and looking good
|July 3 2012, 7:50 PM |
Wow... shock and awe! PLEASE keep posting
Posting or replying to messages on Tank Talk requires visitors to register:
- First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
- Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.
Your user name and password will give you full posting privileges to all of HyperScale Forums.
Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server. Off-topic posts will also be removed from the server. Repeat offenders will be blocked from accessing all of HyperScale's Forums.
In addition, "Tank Talk" is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.
Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.