Return to Index  

Hi Steve. Some ten years ago, I built Tauro's 1/400

August 9 2009 at 10:34 AM
Chris Hall  (no login)
from IP address 86.165.178.27


Response to 1/350 Pola Photo-Etched

model of this ship. Because it wasn't fitted with radar, I found that generic railing, ladder, and ship's fittings sets sufficed to supply all the etch I needed. White Ensighn Models produce suitable stched frets in 1/350 at very reasonable prices.

Cheers,

Chris.

 
 Respond to this message   
Responses


Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server.

In addition, Ship Chat is not a forum for the public criticism of the models that appear as Galleries or Articles on HyperScale. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.