Return to Index  

Re: 1/96 is what in mm ? Thank you

May 19 2011 at 6:01 PM
  (Login alross2)
HyperScale Forums
from IP address

Response to 1/96 is what in mm ? Thank you

1/96. This is a ratio of the model to the actual object and is the same regardless of the unit of measurement used. If you're using a metric unit of measurement, then 1mm on the model equals 96mm on the actual object. If the object was 96m long, the model would be 1m long. Using a fractional unit of measurement such as we use here in the US, 1/96 equates to 1/8" to the foot.

Al Ross

 Respond to this message   

  • 1/32 = 54mm - Ed Keene on May 21, 2011, 11:00 AM
    • Close. - Kevin Johnson on May 24, 2011, 12:33 PM

Posting or replying to messages on HyperScale's Forums visitors to register. If you are already registered to post to Plane Talking, your login will work here too. If you do not have a login, please follow these instructions:

  1. First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
  2. Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server.

In addition, Ship Chat is not a forum for the public criticism of the models that appear as Galleries or Articles on HyperScale. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.

free counters