Return to Index  

The bigger (1/128??) one has a pita seam too, but North/South....

April 24 2012 at 12:18 PM
Tom Booth  (Login bookmark460)
HyperScale Forums
from IP address

Response to frustrating 1/350 Seaview hull seam

at midpoint. The hull's not that much longer than the 'one piecer' 72nd RoG U-Boat's hull halves. I wish Moebius/Platz had gone that route, even w/ the req'd much longer box and perhaps added cost.

I backed mine w/ a bunch of 1/4" x 1/2 x 12" plex strips after chopping up gaps in all the interior molded bracing. Let the glue set for a couple wks and then had at it. It was an OK kit fit but not OK enuff for me, so lots of thin coats of putty and Mr Surfacer, constant eyeballing down the length. Lots of checking w/ a long steel straight edge. I've wanted a lg scale kit of Seaview for a long time so I wanted zero traces of the joint line and for it to look straight, true, like a one piecer.

 Respond to this message   

Posting or replying to messages on HyperScale's Forums visitors to register. If you are already registered to post to Plane Talking, your login will work here too. If you do not have a login, please follow these instructions:

  1. First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)
  2. Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server.

In addition, Ship Chat is not a forum for the public criticism of the models that appear as Galleries or Articles on HyperScale. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.

free counters