<< Previous Topic | Next Topic >>Return to Index  

LF 1/350 "stuff"

May 27 2009 at 8:22 AM		   (no login)
from IP address 166.19.102.21
I am looking for items I need for a 1/350 USS Oriskany aircraft carrier conversion. I need the following:

Two 26 foot whaleboats
One 40 foot motor launch
Eight 5/38 single open mount guns
Fourteen 3/50 twin automatic mount guns

Can buy outright, but prefer to trade. I will accept donations as a last resort. Please let me know if you can help,

JR

 
 Respond to this message   
AuthorReply
Ed Grune
(Login EdGrune)
HyperScale Forums
99.190.209.46

Veteran Models for the 3-inch 50s

May 27 2009, 9:06 AM 

[linked image]

Perhaps the best 3-inch 50s availsble are the Veteran Models ones. Fourteen of them won't be cheap -- they're listed at 4 for 18 bux at PacFront.

YankeeModelworks lists the whaleboat & presonnel boat. L'Arsenal also makes a sweet whaleboat.

L'Arsenal makes many fine aftermarket detail items which will fill your needs

http://www.larsenal.com/GB/index.php

 
 Respond to this message   

(no login)
70.27.146.25

Paper Lab Have Some too...

May 27 2009, 12:02 PM 

You might consider Paper Lab items too. They are available form Pacific Front Hobbies (http://www.pacificfront.com/ ) or MSM (http://www.collectableships.com/models/index.htm ) in US or WEM in the UK (http://www.whiteensignmodels.com/ )

To see what we offer go here -http://www.paperlab.com/index.html

Good luck.

Darius
Paper Lab

 
 Respond to this message   
Current Topic - LF 1/350 "stuff"
  << Previous Topic | Next Topic >>Return to Index  

Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server.

In addition, Ship Chat is not a forum for the public criticism of the models that appear as Galleries or Articles on HyperScale. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.