<< Previous Topic | Next Topic >>Return to Index  

colour question

June 25 2012 at 2:31 AM		   (Login mossieramm)
HyperScale Forums
from IP address 24.132.25.125
Hi there, I'm about to start Trumpeter's 1/350 S-100 Schnellboote and Z-25 1944 and was wondering which WEM paints would be applicable for these two kits.
Also, I want to dress up the S-100 with some PE and/or Resin, are there any good sets about. I've heard that WEM do a PE set, but doesn't fit the trumpeter kit very well as it was made for their own Schnellboote kits.
Thanks for any help.
David

 
 Respond to this message   
AuthorReply
Tom Booth
(Login bookmark460)
HyperScale Forums
66.81.170.6

Email the good folks at WEM. I'm sure they'll set you up. ....

June 25 2012, 3:35 AM 

And too, ask them about the S-100 pe fret. Tho from THEIR resin kit, I believe it will also fit the Bronco/Trump kits. Hell, I wouldn't be surprised if B/T copied WEM's kit in plastic! Naw, they wouldn't do that would they? ......sincerest form of flattery and all. Nudge, nudge, wink, wink.


    
This message has been edited by bookmark460 from IP address 66.81.170.6 on Jun 25, 2012 3:49 AM


 
 Respond to this message   


(Login HowardCGreen33)
HyperScale Forums
174.57.228.129

Yes, by all means e-mail W.E.M....

June 27 2012, 5:54 PM 

I recently e-mailed them asking for color recommendations for the Trumpy 1/350 Z-25. I really didn't expect a detailed response, but they supplied just that, and quite promptly. I've ordered from them twice and find them to be a great company with whom to do business. Pleasant, polite folks with excellent products (love their enamel paints) and generally great service. HTH

Cheers,

Stan

"What have they done to the Earth?...
What have they done to our fair sister?...
Ravaged and plundered and ripped her and bit her
Stuck her with knives in the side of the dawn
Tied her with fences and dragged her down"... Jim Morrison 1968

 
 Respond to this message   

(Login mossieramm)
HyperScale Forums
81.175.86.30

yes..

June 28 2012, 4:17 AM 

I found WEM to be excellent in service and quality as well. I'm a big fan of their enamel paints (except RLM 71).
WEM is my first choice when it comes to paints.
David

 
 Respond to this message   

(Login johnwem)
HyperScale Forums
166.182.3.76

Paints

June 28 2012, 5:45 AM 

For the S-100:

Vertical surfaces above the waterline--overall Schnellbootweiss (Colourcoats KM 10);
Decks--Blaugrau 58.1 (KM 12);
Underwater hull--Schiffsbodenfarbe III Grau 1 (KM 05).

For the Z-25:
HullDunkelgrau 51 (Colourcoats KM 02);
SuperstructureHellgrau 50 (KM 01);
Steel decksDunkelgrau 2 (KM 06);
Wood decksTeak (C 01);
Boot-toppingSchiffsbodenfarbe III Grau 1 (KM 05);
Underwater hullSchiffsbodenfarbe III Rot 5 (KM 04);
Funnel caps--Aluminumbronze (C 04) [kit instructions show black funnel caps, but that is incorrect]


Cheers,
John Snyder
White Ensign Models
http://WhiteEnsignModels.com
WEM on Facebook:http://www.facebook.com/pages/White-Ens ... 405?ref=ts

 
 Respond to this message   
Current Topic - colour question
  << Previous Topic | Next Topic >>Return to Index  

Posting or replying to messages on HyperScale's Forums visitors to register. If you are already registered to post to Plane Talking, your login will work here too. If you do not have a login, please follow these instructions:

  1. First you will need to register with Network 54, the Forum provider. Click here to register with Network 54. (If you already have a Network 54 Login you can go straight to the next step)

  2. Then, while signed in to Network 54, you can sign up for HyperScale's forums. Click here to sign up for HyperScale's forums.

Your user name and password will give you full posting privileges to all of HyperScale Forums.

Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server.

In addition, Ship Chat is not a forum for the public criticism of the models that appear as Galleries or Articles on HyperScale. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.

Finally, please note that this Discussion Group is privately operated and that I reserve the right to delete any post for any reason whatsoever.

free counters