CHRIS CRAFT COMMANDER FORUM ® .......A photo-intensive technical reference file and ongoing newsletter regarding the original fiberglass Chris Craft Commander. Our mission at this independent not-for-profit non-commercial web site is to "have fun and share information" for your individual personal use. Our main reference feature is the ever expanding MASTER INDEX Files which contain exhaustive photo and technical information on the Chris Craft Commander line (like these original brochure scans, featuring the iconic 38 Commander designed by Fred Hudson) , (an awesome collection of Chris Craft 427 tuning and specification information), and a few words about how to use the information in the forum, etc. Be sure to look at the information about the 2009 Lake Erie Chris Craft Commander / Roamer Rendezvous, second year in a row at Huron, Ohio, held in August of 2009 !! If you're a Commander fan, this will be an event you won't want to miss next time around.

We extend to you a cordial "WELCOME ABOARD !"

This forum is registered as chriscraftcommander.com

Return to index

427 Impeller information (chart data)

August 26 2006 at 11:14 AM

Paul (no login)

Response to Good one !

Thanks for the note, Tom. I thought I should add some info about the actual impeller specs for the pump.

Interestingly enough, Sherwood shows 3 different pump specs for the 427, and I suspect most all of us out there in Commanderland have the 11095G like I showed in the photos. However, there apparently are some different pumps out there, and people placing orders for replacements need to be aware of this. In the end, upon checking with the tech guys at Sherwood, the same impeller may actually work in all of them, but I sure would NOT assume that, especially since different numbers appear on their literature.

One way to be sure is to pull the pump and look at the ID number, but it's sure a lot easier to just pop in the impeller if you know what one is specified.

Of interest, I see the same 11095G Sherwood is also listed as a replacement pump for the 283F and 327F

For your reference files:

regards, Paul

FXA 38 3004 R
Original 427 power

This message has been edited by FEfinaticP on Nov 4, 2008 2:39 PM

Respond to this message

Responses

any difference in pumps between the various commander models? - Cliff Hubbard on Oct 23, 2006

Hello Clifford, welcome aboard - Paul on Oct 24, 2006

Thank you for the information - Cliff Hubbard on Oct 25, 2006

That's probably a fair gamble - Paul on Oct 26, 2006

Contact the Chris Craft Commander Forum
chriscraftcommander@hotmail.com

©2005, ©2006, ©2007, ©2008, ©2009, Chris-Craft Commander Forum, Inc., ®, also known as ChrisCraftCommander.com. Information and intellectual property on this not-for-profit non-commercial site may be copied for individual personal use, but any other reproduction or use requires written approval. Any entity who mines this site for names, material, or their other commercial/financial benefit in any way is subject to copyright and intellectual property law; the integrity of this site will be aggressively protected. The material here is for indivudual personal use and is not to be sold. Chris Craft is a registered trademark of Chris-Craft. Neither Chris-Craft nor any subsidiaries of Chris-Craft shall bear any responsibility for the chriscraftcommander.com content, comments, or advertising. Chris Craft Commander Forum, Inc., is independent from Chris Craft Corporation, the Chris Craft Commander Club, any other entities, and is not affiliated with, sponsored or supported by those organizations in any way. Copyright/trademark/sales mark infringements are not intended, or implied.