CHRIS CRAFT COMMANDER FORUM ® .......A photo-intensive technical reference file and ongoing newsletter regarding the original fiberglass Chris-Craft Commander series. This is an independent not-for-profit and non-commercial web site, not affiliated with the Chris Craft Commander Club ~~ or ~~ Chris-Craft Corporation. Our mission here is to "have fun and share information" about the Commander series (and those associated fiberglass boats on the Chris-Craft family tree) for your individual personal use, and by doing so help promote the good name of Chris-Craft, and help preserve, restore, and appreciate Chris-Craft boats. The main reference feature is the ever expanding MASTER INDEX File which contains what we believe to be the world's largest collection of documentation photos and technical information on the Chris-Craft Commander line of boats, (like these original brochure scans, featuring the iconic first 38 Commander styled by Fred Hudson, and many of the great Dick Avery renditions that followed) , (a huge collection of Chris-Craft 427 tuning and specification information), and a few words about how to use the forum.

We extend to you a cordial "WELCOME ABOARD !" Come on in, make yourself at home, we are a friendly group of enthusiasts, and we also appreciate the classic Chris Craft Roamer, Corsair, and Lancer boats too , as they are all on the same family tree and share much in common ! Just start by posting a note introducing yourself to the group, that's all it takes here (we don't ask for or retain any personal information here, because our intention is to just "have fun and share information".

This forum is registered as chriscraftcommander.com

   

ANOTHER run to the hardware store............... ( photo )

June 20 2007 at 3:12 PM
Paul  (no login)


Response to So much of the work can't be photographed !

This particular hardware is a full service hardware and not one of the "Home Depot" type stores. Therefore it has things that can be very useful to the Do-It-Yourselfer!

My new Teleflex steering arm coming out of the steering cable has a 3/8" opening for a 3/8" pin or bolt. Only trouble is, the old tiller arm has a hole in it that's bigger.

Amazingly, I found a BRONZE BUSHING that perfectly fits through the bronze tiller arm, with the perfect interior diameter for a (stainless steel) through-bolt. I'll have to grind off some of that bushing, but this is just PERFECT for mating up the two different sizes.



The bushing was $3, the bronze washers were $1.50 each, and less for the stainless steel parts. I got two different through-bolts just to be sure I had one that wouldn't be grinding threads against the internal side of a bushing, etc.

Add gas for that trip, it's another five bucks. Sheesh, no wonder these projects take so long. I'm going to install the bolt with the threaded side down, with two lock nuts jammed against one another. If the steering ever goes out, it won't be because of this part!

Regards,

Paul

 
 Respond to this message   

Contact the Chris Craft Commander Forum
chriscraftcommander@hotmail.com

©2005, ©2006, ©2007, ©2008, ©2009, ©2010, ©2010, ©2011, ©2012, ©2013, ©2014, ©2015, ©2016, ©2017, ©2018, Chris-Craft Commander Forum, Inc., ®, also known as ChrisCraftCommander.com. and the Chris Craft Commander Forum, Inc.; Information and intellectual property on this not-for-profit non-commercial site may be copied for individual personal use, but any other reproduction or use requires written approval. Any entity who mines this site for names, material, or their other commercial/financial benefit in any way is subject to copyright and intellectual property law; the integrity of this site will be aggressively protected. The material here is for individual personal use and is not to be otherwise used or reproduced. Chris Craft is a registered trademark of Chris-Craft. Neither Chris-Craft nor any subsidiaries of Chris-Craft shall bear any responsibility for the chriscraftcommander.com content, comments, or advertising. Chris-Craft Commander Forum, Inc., is independent from Chris-Craft Corporation, and not affiliated with the Chris-Craft Commander Club in any way; it is an independent educational-based not-for-profit entity that is intended to share free information and have fun. Copyright/trademark/sales mark infringements are not intended, or implied.