| Login/Logout | Timex Forum | Sales & Trades | Interesting Links | Contests | Manuals & Catalogs | FAQ's & Help | Off-Topic Section |
The Timex Watch Forum
 Return to Forum  

Timex perpetual setting instructions...

March 30 2009 at 1:49 PM
Score 5.0 (1 person)

gigfy 
from IP address 199.209.144.65


Response to Re calibrating a Timex Preputal Calender watch

I found the instructions below, but can't you just manually advance the hour/min hands until you reach the correct day/date?  Will that work?

Set time:

To set time, simply pull crown all the way out and turn. Day and date

change automatically when time is adjusted past midnight; there is no

additional step for setting day or date. Push crown in when done.

 

Set Date (after battery change):

Set time and day of the week first (see above). Then, set date as follows.

Please read all instructions before continuing. All steps must be performed.

If setting is not done properly, push reset switch arm (see picture

above) or remove and re-install battery, and repeat procedure in

order for perpetual calendar feature to work.

 Pull crown to MIDDLE position.

If necessary, turn crown until date is centered in date window.

Push crown in.

Pull crown to MIDDLE position and wait for at least ten seconds (date

moves back and forth).

Turn crown until '1' is displayed in date window and push crown in.

Date moves back and forth to indicate start of date setting.

Pull crown to MIDDLE position.

Turn crown until correct date (1-31) is shown and push crown in.

Watch displays '2' in date window to indicate start of month setting.

Pull crown to MIDDLE position.

Turn crown until correct month (1-12) is shown and push crown in.

Watch displays '3' in date window to indicate start of year setting.

Pull crown to MIDDLE position.

Turn crown until correct year (last two digits) is shown and push

crown in.

Watch displays correct date and setting is done.

Watch will show correct date for battery's life. If date changes at noon,

adjust time by 12 hours. If incorrect date is shown at beginning of

month, date may not have been set. Follow procedure above. If date

does not move back and forth after waiting ten seconds, in the fourth

step, push reset switch arm (see picture above) or remove and re-install

battery and repeat procedure.

 

http://www.timex.ca/en/instructions/perpetualCal.pdf

 

Cheers,

gigfy


 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Responses



| Login/Logout | Timex Forum | Sales & Trades | Interesting Links | Contests | Manuals & Catalogs | FAQ's & Help | Off-Topic Section |

Timex Watch Forum stats counter
Web Site Hit Counter