Home > Discussion Groups > Japanese Modelling

Message posting guidelines:
1.

Full real names must be used at all times.

2.
A valid e-mail address must be provided. (This is not optional)
3.
Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.
4. From 1 November, registration is compulsory if you wish to post on this Japanese Modelling Discussion Group. For further information, please see the following message: http://www.network54.com/Forum/449919/message/1130495649/Compulsory+Registration+on+Discussion+Groups
Please read our Community guidelines before posting.
By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.
Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.
Japanese translation service

  << Previous Topic | Next Topic >>Return to Index  

Another Ka Mi question.

February 27 2012 at 10:33 PM		   (Login horra)
Missing-Lynx members
from IP address 124.186.165.40
Just regarding details on the vehicle, or more accurately how to paint them.

I believe the antenna rail on the Type 97's was brass or at least a brass colour(?) This makes me wonder if the railing on the front of the Ka Mi is of a similar material?
This is part K3 in the 1/35 Dragon kit.

Also, the bollards on the side of the hull (part B20)On boats these were generally cast bronze (in my experience anyhow) I have seen more modern vessels with chromed items.
I wonder if they may have been bronze on the Ka Mi due to its resistance to sea water corrosion?

Any help is greatly appreciated.

 
 Respond to this message   
Current Topic - Another Ka Mi question.
  << Previous Topic | Next Topic >>Return to Index  


Terms and Conditions of Use Report abuse