Huh? Scott, the scope itself was level and I had adjustment left and right. But

June 30 2017 at 10:42 PM

Paul Porch  (Login paulporch)

Response to Solution does not require adjustable rings.

The rail was not straight on the chassis due to the back being flexed. I tried everything including rotating the scope in the rings. If the tube is not inline with the bore but crossways across the centerline of the bore, you believe it can be corrected by rotation and windage?

I found windage would only align the scope but still at an angle to to bore. My problem was a mechanical problem. Am I wrong here? I have been doing gunsmith work on customer powder burners for 30 years and never found a way to correct this type issue with physical bore alignment, without shims or adjustable rings. Hey I am happy to learn though if there is another way....

 Respond to this message   


On line trajectory calc by Brad Troyer MILDOTS


JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information. Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.


When you signed up you agreed to All N54 Rules. 1-No Flaming or name calling. No personal attacks, racial slurs, foul language, insults or trolling. This is cause for post deletion and/or banning. 2-Instigating with the purpose of drawing people into highly argumentative situations and wasting of bandwidth is cause for post deletion and/or banning. 3-Do NOT comment on Forum Moderation. It is what it is, live with it or leave. This is an immediate 30 day ban. 4-If you feel wronged email 5- Keep this FT forum civil and behave in a socially acceptable manner. 6- The primary purpose of this FT forum is the discussion of field target; however, the buying and selling of field target gear and rifles is permitted between forum users pursuant to the same rules as the Yellow Classifieds and the user assumes all responsibility for the transaction. Non-sponsoring dealer sales are not allowed. To keep the forum clean of ads and pursuant to the intent of the FT forum, WTB and FS ads are subject to deletion by the forum moderator once they fall off of the first page.