If you look back some months ago... Donavan posted a nice rig that he put together with a Match Pistol. Looks just like the LP1. In fact, I believe he said it was the same gun? I'm not sure, but it is a very nice looking setup.
Here is the gun as it is today: It is an Anschutz LP@
May 21 2010, 4:36 PM
that was made by Steyr for Anschutz. The main difference is that the Steyr is shrouded and the Anschutz has the weight on a rod running parallel to the barrel. To set up your Steyr similar to this would require removing the shroud. I hope this helps
This five shot group was shot from a seated FT position at 25yds with AA 8.4gr pellets.
[IMG][/IMG]
This message has been edited by jamdon on May 21, 2010 11:15 PM
Could you please get me a link to the "Benjamin/Sheridan intermount & weaver rail kit from Pyramyd Air"?
So, I assume those are Weaver-type high mounts (as opposed to mounts for standard 11mm airgun rails).. how about a link for the mounts? . BTW, I suppose the scope is mounted just high enough to clear the cocking lever (so standard-height mounts would out be out of the question, right?)
How is the Pistol working out for you? Is the power level up-to snuff for PFT use?
You sure did a nice job with it... Looks nice!
Thanks,
HookEm
This message has been edited by HookEm on May 21, 2010 6:50 PM
"How is the Pistol working out for you? Is the power level up-to snuff for PFT use?
You sure did a nice job with it... Looks nice!"
Thanks for the compliment. I turned up the velocity to an average of 590fps using AA 8.4gr pellets. I find that to be enough power for PFT use. The gun is dead calm with no recoil. I don't remember the brand of the scope mounts (I will try to find that info) but it mounts the scope high enough to clear the cocking lever. It is definitely a pleasure to shoot this pistol.
I have not been shooting it much because I am busy trying to master my EV2.
This message has been edited by jamdon on May 21, 2010 11:14 PM
This Forum's, moderators and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums by people under 18 years old is allowed only with legal guardian(s) present.
FORUM RULES BELOW
When you signed up you agreed to All N54 Rules.
1-No Flaming or name calling.No Personal attacks, racial slurs, foul language or insults and no trolling.
2-Instigating with the purpose of drawing people into highly argumentative situations and wasting of bandwidth is a cause for post deletion and/or banning.
3-Do NOT comment on Forum Moderation. It is what it is, live with it or leave. This is an immediate 30 day ban.
4-If you feel wronged email [email protected]
- Keep the forum Civil and behave in a socially acceptable manner.
![[linked image]](http://i23.photobucket.com/albums/b360/jamdon/DSC_0128.jpg)
[/IMG]
. BTW, I suppose the scope is mounted just high enough to clear the cocking lever (so standard-height mounts would out be out of the question, right?)
![[linked image]](http://www.kenlightmfg.com/tctaco3rise.gif)