Return to Index  

Either spray of brush...

June 4 2010 at 10:06 AM
No score for this post

Ray Seppala  (Login Aussie747)
from IP address

Response to Future Application Recommendation



There are various methods, some spray it straight from the bottle, others thin it with Isopropyl Alcohol. You can also brush it on with a broad brush. Its self levelling properties help to hide brush marks. Some will also rub back each layer and recoat to get a showroom shine happy.gif That is not necessary if you are only going to flat coat after the declas go down.

You can use a decal softener. I have used the Microscale products as well as Solavaset. Just be aware that some softeners will turn the surrounding future a milky white colour. But do not dispair, if you recoat the area after the decls have set with a fresh coat of Future the white disappears.

Missed it by that much!....

Scoring disabled. You must be logged in to score posts.Respond to this message   

Find more forums on Network54Create your own forum at Network54
 Copyright © 1999-2018 Network54. All rights reserved.   Terms of Use   Privacy Statement