SpringGunning



  << Previous Topic | Next Topic >>Return to Index  

HW177 Bull

October 31 2007 at 5:09 PM

Paul Watts  (Premier Login SpringGunner)
Owner

I have some extra 177cal HW barrels so I decided to cut some back and shroud them. Since I was having them reblued as well I added removable tool steel cocking lever pins and breech inserts. The top of the breech was plugged and milled flat. I've got a R9 that will most likely get this one. I might even get around to the last Varmint stock for it. I also have a R7 barrel that's getting the same treatment. I'll match blue the whole gun though. Should make for a true one off. I've yet to see a R7 with no breech holes. I might contour it like the UberLuft127. You have a little more meat in the breech considering the R7 has a smaller OD barrel and lot softer spring.

Paul









    
This message has been edited by SpringGunner on Oct 31, 2007 6:16 PM


 
 Respond to this message   
AuthorReply
FourRings
(Login FourRings)
SpringGunning Customers

Oh man, more of them! Expect my call

November 2 2007, 1:45 PM 


 
 Respond to this message   
 
  << Previous Topic | Next Topic >>Return to Index  





R9