Home > Discussion Groups > Axis

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.


Advertisement

 Return to Index  

Just received my Brach Model 4.7cm Pak(t) auf Pz.Kpfw 35R (f)

June 21 2012 at 7:37 PM
  (Login halbcl2)
Missing-Lynx members
from IP address 206.45.176.212

I have to say it is the best resin casting that I have ever seen! If it wasn't for the casting blocks, it could be mistaken for injected moulded styrene - Tamiya quality at that. There is not a single air bubble or wart to be found. And only a wisp of flash on a couple of parts. Absolutely no warping nor bending.
Exemplary packaging too - the tiny beast comes in a 26 x 16 x 10cm primary box, "peanut" packed in a larger shipping box. The resin part are in 14 separate sealed bags, with a PE sheet, decals and a couple of odds & ends.
Now I have to clear my work desk and think about attacking it.

 
 Respond to this message   


Terms and Conditions of Use
Report abuse