Home > Discussion Groups > Axis

Message posting guidelines:

  • Full real names must be used at all times.

  • A valid e-mail address must be provided. (This is not optional)

  • Images must be posted at low resolution (72 dpi) and no larger than 760 pixels wide, and copyright/trade mark owners must be credited whenever reasonably possible.

  • Registration is compulsory if you wish to post messages on the Discussion Groups. For further information, please see the following message: http://www.network54.com/Forum/message?forumid=47207&messageid=1113822984

Please read our Community guidelines before posting.

By contributing to this discussion group, you indicate your agreement to the Terms and Conditions of Use.

Posts that violate the guidelines or Terms and conditions of Use of the Missing-lynx.com discussion groups will be erased, and repeated violation of this policy may result in termination of the violator's account.


Advertisement

 Return to Index  

Suggestions for a good small diameter punch and die set ?

June 14 2017 at 2:21 PM
jerry rutman  (Login jrutman53)
Missing-Lynx members
from IP address 64.121.182.244

A vendor for same would also be appreciated,my old sets are about done after a faithful 25 years or so service.
J

 
    
Responses

  1.   RP Toolz - Andrew deeley on Jun 14, 2017, 2:47 PM
    1. Thanks Andrew ! - jerry rutman on Jun 14, 2017, 2:54 PM
      1. RP Toolz = Rip Peoples (designs) Tools - Alasdair Johnston on Jun 14, 2017, 7:19 PM
        1. A punch is a punch is a punch - Kurt Laughlin on Jun 14, 2017, 7:35 PM
          1. really strange defence - Alasdair Jonhston on Jun 15, 2017, 2:10 AM
            1. Original - Andrew deeley on Jun 15, 2017, 4:04 AM
            2. Re: really strange defence - Arild Moland on Jun 15, 2017, 11:36 AM
            3. Quality, Functionality and Utility can... - Mike Roof on Jun 15, 2017, 11:51 AM
              1. True, but . . . - Kurt Laughlin on Jun 15, 2017, 12:36 PM
                1. Images - Alasdair Johnston on Jun 15, 2017, 4:11 PM
                  1. Here's what speaks for itself, in distilled form - Kurt Laughlin on Jun 15, 2017, 7:31 PM
                    1. Not mine anymore: - Alasdair Johnston on Jun 15, 2017, 8:32 PM
     
  2.   UMM-USA - Mike Roof on Jun 14, 2017, 10:45 PM
    1. Thanks Mike ! This one looks the best so far - jerry rutman on Jun 15, 2017, 10:15 AM
     
  3.   A minor point - JohN Harris on Jun 15, 2017, 4:15 AM
    1. Thanks but this is the only forum I check so - jerry rutman on Jun 15, 2017, 10:16 AM
      1. I'm guessing Allied rivets are much the same as Axis ones (n/t) - John Harris on Jun 15, 2017, 11:43 AM
        1. And your post also explains why most serious modelers are - jerry rutman on Jun 15, 2017, 12:44 PM
          1. Re: And your post also explains why most serious modelers are - John Harris on Jun 15, 2017, 1:08 PM
      2. You also appear on Constructive Comments frequently - Kurt Laughlin on Jun 15, 2017, 7:41 PM
     


Terms and Conditions of Use
Report abuse